Editing sounds | 11. UTILITY parameters
76
r
FR-7b/FR-5b V-Accordion
11. UTILITY parameters
The UTILITY group contains three kinds of parameters: those that keep you informed (to check the bat-
tery status), several parameters that allow you to copy settings and three parameters for archiving
your settings via MIDI. See pages 39 and 41 for how to select and adjust the parameters.

11.1 Battery Status

The FR-7b comes with a Ni-Mh
battery that allows you to use it
without connecting it to the
supplied FBC-7. The FR-5b pro-
vides the same battery compart-
ment as the FR-7b, but the battery is an option. (As
long as you do not purchase such a battery, you need
to connect the FR-5b to the supplied FBC-7.)
Note: There is no “EDIT” page here, because there is no parameter
you can set.
Depending on how the FR-7b/FR-5b is powered, the
display shows one of the following messages:
This message means that the
FR-7b/FR-5b is powered by the bat-
tery in its compartment. The bat-
tery icon shows how much power is
left.
It would be a good idea, however, to stop by this
page before you go on stage or start playing, because
what you see then might just convince you to use the
FBC-7.
B-Griff Fin D-Griff 1 D-Griff 2
10.15 Treble Mode (2/2)