Roland KC-350, KC-550 9. STEREO LINK, 10. SUBWOOFER OUT Jack, 11. AUX IN Jacks

Panel Descriptions

9. STEREO LINK

Stereo playback is enabled simply by connecting two KC-550

or KC-350 units with a single audio cable (phone type).

* For details on the Stereo Link function, refer to “Stereo Link”

(p. 12).

Connect this jack to the STEREO LINK IN jack on a sub (L)

KC-550/KC-350 when using a Stereo Link configuration.

This output jack provides 0 dBu line level output.

When a cable is connected to the STEREO LINK OUT jack,

the right-channel input signals are output from the internal

speakers. The left-channel input signals are output from the

STEREO LINK OUT jack to the other KC-550/KC-350.

Connect this jack to the STEREO LINK OUT jack on the main

(R) unit (the other KC-550/KC-350) when using a Stereo Link

configuration.

This accepts level input of 0 dBu.

Only the STEREO LINK IN input signals are output from the

internal speakers.

This lets you play even more powerful bass by connecting a

powered subwoofer.

Provides full-range output, at an output level of +4 dBu.

You can use the MASTER CONTROL knobs (LOW, MIDDLE,

HIGH, and VOLUME) to adjust the tone and volume level.

*SHAPE switch do not affect SUBWOOFER OUT.

These are RCA phono type input jacks.

You use these to connect equipment such as CD and MD

players, and have them sound along with the equipment

connected to CH 1 through CH 4.

They accept level input of -10 dBu.

* To adjust the volume level of equipment connected to the AUX

IN jacks, use the controls on such equipment.