13
Before You Start Playing
Connecting Headphones
The RP101 has two jacks for plugging in headphones.
This allows two people to listen through headphones
simultaneously, making it very useful for lessons and when
performing piano pieces for four hands. Additionally, this
allows you to play without having to worry about bothering
others around you, even at night.
1.
Plug the headphones into the Phones jack located at
the bottom left of the piano.
Connecting headphones will automatically mute the sound
from the internal speakers. The headphone volume is
adjusted by the [VOLUME] knob of the RP101 (p. 14).
fig.00-04.e
NOTE
Use Stereo headphones.
Some notes on using headphones
• To prevent damage to the cord, handle the headphones
only by the headset or the plug.
• Connecting the headphones when the volume of
connected equipment is turned up may result in damage
to the headphones. Lower the volume on the RP101
before plugging in the headphones.
• Listening at excessively high volume levels will not only
damage the headphones, but may also cause hearing
loss. Use the headphones at a moderate volume level.
■
Using the Headphone Hook
Whenever you are not using the headphones, you can hang
them on the headphone hook at the lower left of the RP101.
Attaching the Headphone Hook
Press and twist the headphone hook included with the RP101
into the hole in the bottom of the RP101 (refer to the figure
below). Turn the wing nut of headphone hook to secure the
headphone hook.
Phones jack x 2
Headphone Hook
Wing Nut Hole
RP101_e.book 13ページ ２００７年４月４日 水曜日 午前１１時５０分