Roland SA-1000 Jack Panel

10

Names of Things and What They Do

Jack Panel

fig.01-02

1. MIC IN Jack

Connect a microphone here. For balanced input, you can

connect to the TRS 1/4-inch phone jacks and XLR type

connector.

• This instrument is equipped with balanced (XLR/TRS)

type jacks. Wiring diagrams for these jacks are shown

below. Make connections after first checking the wiring

diagrams of other equipment you intend to connect.

2. KEYBOARD IN 1, 2 Jack

Connect organs, keyboards, or other line level devices

here.

These jacks accept stereo input; for mono input, use the

left channel jacks. Line level input (-20 dBu) is

supported.

3. AUDIO IN Jack

Connect a CD player or other line level device here.

Inputs accept RCA phono type plugs.

12

45678

3

MIC INPUT

KEYBOARD INPUT(1, 2)

AUDIO INPUT

SA-1000_r_e.book 10ページ２００７年１０月１日　月曜日　午後１時５２分

Contents

Main Owners Manual Contents CAUTION IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS Page IMPORTANT NOTES Placement Power Supply Maintenance Additional Precautions Main Features Names of Things and What They Do 15 MIC INPUT 6 1011 12 13 KEYBOARD INPUT(1, 2) AUDIO INPUT MASTER Jack Panel AUDIO INPUT MIC INPUT STEREO LINK LINE OUT SPEAKER Making the Connections Switching the Power On and Off Making the Connections Making the Connections About the Volume and Tone Settings About Setting the Volume About Stereo Link SA-1000 (L) SA-1000 (R) About the Anti-Feedback Function About Speaker and Mic Placement Safety Margin Function Dynamic Function To Avoid Feedback How to Use Anti-Feedback When Using a Handheld Mic When Using a Mic Stand When automatic measurement is not completed About the Use of Stacks About the Protection Circuit Block Diagram Main Specifications SA-1000 Main Specifications SA-1000W (SUBWOOFER) Page NOTICE AVIS FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT