Roland SA-1000 Maintenance, , Additional Precautions

Maintenance

• To clean the unit, use a dry, soft cloth; or one that is

slightly dampened. Try to wipe the entire surface using an

equal amount of strength, moving the cloth along with the

grain of the wood. Rubbing too hard in the same area can

damage the finish.

• Never use benzine, thinners, alcohol or solvents of any

kind, to avoid the possibility of discoloration and/or

deformation.

Additional Precautions

• Use a reasonable amount of care when using the unit’s

buttons, sliders, or other controls; and when using its jacks

and connectors. Rough handling can lead to malfunctions.

• When connecting / disconnecting all cables, grasp the

connector itself—never pull on the cable. This way you

will avoid causing shorts, or damage to the cable’s

internal elements.

• A small amount of heat will radiate from the unit during

normal operation.

• To avoid disturbing your neighbors, try to keep the unit’s

volume at reasonable levels. You may prefer to use

headphones, so you do not need to be concerned about

those around you (especially when it is late at night).

• When you need to transport the unit, package it in the box

(including padding) that it came in, if possible. Otherwise,

you will need to use equivalent packaging materials.

• Some connection cables contain resistors. Do not use

cables that incorporate resistors for connecting to this unit.

The use of such cables can cause the sound level to be

extremely low, or impossible to hear. For information on

cable specifications, contact the manufacturer of the cable.

• Wrap the power cord around the cord hook when trans-

porting or storing the unit.

SA-1000

SA-1000_r_e.book 6ページ２００７年１０月１日　月曜日　午後１時５２分