Roland SL-20 - page 14

14
Operating the SL-20
3. Press the START/STOP pedal to stop recording.
The PLAY indicator lights up; loop playback of the recorded phrase begins.
* Pressing the TAP pedal during loop playback of a phrase causes the SL-20 to return the phrase to the
beginning and play it back from that point.
You can enjoy performing solos using recorded phrases as backing sounds.
The volume level of the backing can be adjusted with the EFFECT LEVEL knob, while
you can use the DIRECT LEVEL knob to adjust the volume of the solo performance.
4. Press the START/STOP pedal to stop loop playback.
The PLAY indicator goes out.
* Changing tempo by the SL-20 is not available while recording or loop playing back.
* Recorded phrases cannot be permanently stored onboard the SL-20. Loop playback stops, and the
recorded phrase is deleted.
* You cannot change the tempo of the recorded phrases.
* This feature does not permit overdubbing.
SL-20_e.book 14 ページ ２００８年３月２８日 金曜日 午前８時２８分