Roland TD-3KW , Head Shots, Rim Shots, , Playing Methods, Cross Stick, , Attaching the Pad to a Stand

6
USING THE UNIT SAFELY
Attach the PDX-8 to a pad mount of the stand.
Be sure to tighten the stand fixing screw securel. If it
remain loose, double triggering may occur.
fig.Stand.e
Head Shots
fig.HeadShot.e
* Do not strike the hoop.
Rim Shots
fig.RimShot.e
* To play rim shots, strike the rim in the area shown in the
diagram.
fig.RimShot.e
Cross Stick
Only strike the rim of the pad.
Depending on the instrument assigned to the rim, you
can play rim shots and/or cross stick sounds.
fig.XStick.e
* To play the cross stick, be sure that you only strike the rim of
the pad. Placing your hand on the head of the pad might
prevent the cross stick sound from being played properly.
For more on settings and tones, see the respective
module’s owner’s manual.
If you hear a rim sound when you strike the head,
decrease the “Rim Sensitivity ( )” value.
If you cannot get a rim sound even when you strike
the rim hard, increase the “Rim Sensitivity ( )”
value.
Attaching the Pad to a Stand
Playing Methods
Rod
Tighten
Loosen
Head
Rim
Player
Suitable position
for rim shots
Rim
Rim
TD-3KW_e 6ページ ２００６年１月２４日 火曜日 午後６時７分