32
Creating a drum kit
1. Press [KIT]-[F2] (FUNC).
The “FUNCTION” screen appears.
2. Press [F3] (MIDI).
3. Press [F1] or [F2] to select the parameter you want to
edit.
If you pressed [F1]
4-1. Use [CURSOR] to select the pad/parameter.
4-2. While holding down [SHIFT], use CURSOR [ ] [ ]
to switch between HEAD and RIM, or play the
desired rim/pad or pedal
If you pressed [F2]
4. Use CURSOR [ ] [ ] to select the parameter.
5. Use [+/-] or [VALUE] to edit the value.
6. Press [EXIT] several times to return to the “DRUM
KIT” screen or just press [KIT].
If you’re using an external MIDI device (Midi controller
pad, keyboard or sequencer) to play the TD-9’s internal
sounds, note numbers transmitted to the TD-9 will trigger
the instrument of the pad that is assigned to that note
number.
MIDI parameters for each pad & pedal
Screen Parameter Value Description
[F1] (NOTE)
NOTE NUMBER
0–127,
OFF MIDI Note Numbers transmitted by each pad/pedal
* If you select a note number already assigned another pad, an “*” appears on the left-side of
the note number.
[F2] (HI-HAT)
HH Open (Bow)
0–127,
OFF MIDI Note Numbers transmitted by bow shot of open hi-hat
HH Closed (Bow)
0–127,
OFF MIDI Note Numbers transmitted by bow shot of closed hi-hat
HH Open (Edge)
0–127,
OFF MIDI Note Numbers transmitted by bow edge of open hi-hat
HH Closed (Edge)
0–127,
OFF MIDI Note Numbers transmitted by edge shot of open hi-hat
HH Pedal
0–127,
OFF MIDI Note Numbers transmitted by pedal hi-hat
Xstick
0–127,
OFF MIDI Note Numbers transmitted by cross stick
* The HH Compatibility and HH Note# Border setting is required to transmit switches between
the open and closed hi-hat. For details, refer to p. 53.
* If you select a note number already assigned another pad, an “*” appears on the left-side of
the note number.
TD-9_e.book 32 ページ ２００８年１月２３日 水曜日 午後４時２４分