34

Playing

This section explains how to play the V-Piano.
The V-Piano contains 24 different “tones” (preset tones). Here’s how to select and play these tones.

The sound will be interrupted when you switch tones, but this does not indicate a malfunction.

1.

Access the tone screen.

The tone screen will appear when you switch on the V-Piano’s power.
If any screen other than the tone screen is shown, press the [EXIT] button.

2.

Press one of the [TONE 1]–[TONE 4] buttons.

With the factory settings, the following preset tones are assigned to the buttons.
[TONE 1] button: No. 001 Vintage Piano 1
[TONE 2] button: No. 008 Vintage Piano 2
[TONE 3] button: No. 015 All Silver 1
[TONE 4] button: No. 020 All Silver 2

fig.play-1.eps

3.

Try selecting other preset tones.

Make sure that the tone number is highlighted, and turn the [VALUE] dial.
This allows you to select preset tone numbers 001–024.

fig.play-2.eps

If the tone number is not highlighted, press the [EXIT] button.

Selecting and playing a sound

V-Piano_e.book 34 ページ ２００９年１月２８日　水曜日　午前９時１０分