26
Basic Operations
941
● Once the connections have been completed (p. 14), turn on
power to your various devices in the order specified. By turning on
devices in the wrong order, you risk causing malfunction and/or
damage to speakers and other devices.
942
● This unit is equipped with a protection circuit. A brief interval (a
few seconds) after power up is required before the unit will operate
normally.
1Turn the volume on the connected device all the way
down
2Press the POWER switch on the left side of the front
panel.
●When changing settings with the menu (p. 30), first close the main
menu before turning power off. If power is turned off without
closing the main menu, the set contents will not be saved.
945
●If you need to turn off the power completely, first turn off the
POWER switch, then unplug the power cord from the power outlet.
Refer to “Power Supply” (p. 6).
1Turn the volume on the connected device all the way
down
2Press the POWER switch on the left side of the front
panel.
This unit has multiple video input connectors: i.LINK connector,
COMPONENT connector, DVI-I connector, and HD-SDI connector
(VC-300HD). Simultaneous video input is possible.
When converting a video signal, the connector for the video to be
converted must be selected.
1Press the INPUT button until "100: Video Source" is
shown in the display
The INPUT button lights, and the screen shown in the figure is
displayed.
2Use the VALUE/ENTER knob to select the connector
where the video is being input
3Press the VALUE/ENTER knob to confirm the selection.
The Status screen returns to the display (p. 29).
When a video signal is input to the selected video input connector,
a video signal is output in the output format set with “Selecting the
video output format” (p. 27).
* When a connector with no input is selected, a black matte image is
output.
* Specify the video input format with the "110: i.LINK IN" (p. 32),
"120: COMPONENT IN" (p. 32), "130: DVD-D IN"(p. 32), "131:
DVI-A IN" (p. 32), and "140: SDI I IN" (p. 32) items of the Menu (p.
30).

Turning Power On/Off

Turning power on

Turning power off

Selecting the video input

connector

INPUT button
VALUE/ENTER knob