Rolls RDB109 quick start Description, Introduction, Front Panel, Operation, Rear Panel

INTRODUCTION

Thank you for your purchase of the ROLLS RDB109 SOUND CENTER. The RDB109 is an audio distribution device with a single balanced XLR line-level input, distributed via transformer isolation to ten balanced XLR outputs.

NOTE: This manual assumes the user has a basic working knowledge of the proper connection and operation of profes- sional audio equipment.

DESCRIPTION

FRONT PANEL

RDB109

Output Jacks 1 - 10: Balanced XLR jacks.

OPERATION

Connect the input source to the INPUT of the RDB109. This may be a line level or consumer level signal. We do not recommend connecting a microphone directly into the RDB109 INPUT. Connect the RDB109 OUT- PUTs to the inputs of the recording, broadcasting, etc. devices.

WARRANTY INFO

Please visit our web site; www.rolls.com, for complete information on the Rolls Warranty, and to register and initiate this product’s warranty.

SPECIFICATIONS

Connectors:	1	XLR Female Input Jack
	1	XLR Male Loop Through Jack
	10 XLR Male Output Jacks
Frequency Response:		30 - 20kHz +0 /- 3 dB
Output Impedance:	600 W each
Input Impedance:	60 W
Size (W x H x D):	19” x 1.75” x 2.5” (480 x 45 x 64 mm)
Weight:		4 lbs.

REAR PANEL

INPUT	LOOP THRU	XLR
		Female	XLR
		Input	Male - Loop Thru	60 Ohm - 600 Ohm
		2	3 2	3	2	XLR Male
		3	1		1	Output x 10
		1

XLR
Female	XLR
Input	Male - Loop Thru 60 Ohm - 600 Ohm

To 9 more transformers

and XLR Outputs

INPUT: Balanced female XLR jack.

LOOP THRU: Balanced male XLR jack hard-wired to the INPUT jack.

2

3

3

1

2

1

32 XLR Male

1 Output x 10

To 9 more transformers and XLR outputs