24” Double Ovens
27” Double Ovens
Before you start...
Read Electrical and Carpentry instructions Proper mstaLlatmn1syour responslb&y A quahfled technman should mstall this oven Make sure you have everythmg necessary for correct 1nstaUat1on
Check location where the
strong draft areas, such as wmdows. doors, and strong heatmg vents 01fans The
oven should be located for convenient use m htchen.
Cabinet opening djmensions that are shown must be used. Given chmenslonsprovide mmunum clearance Contact surface must be sohd and level
The recessed installation area must prowde complete enclosure around the recessed ponlon of the oven
ALL OPENINGSIN THE WALL OR FLOOR WHERE THE
The oven suppon surface must be flush with the bottom of the cabinet cutout.
Note:
Clearances specified are for combustible walls and materials that have a density of 20 or more pounds per cubic foot. No evaluation of clearances has been made for installations adlacent to materials that are less than 20 pounds per cu. ft. or to plastic tiles and sheeting.
Important: Observe all governing codes and ordinances.
Personal Injury Hazard |
|
ISecurely fasten wall oven to cabinets | I |
using the screws provided (4 screws for |
|
a double oven or 2 screws for a single |
|
oven). |
|
Failure to do so could cause oven to |
|
move or tip during use and result in |
|
personal injury. |
|
Do Not block the oven vent. |
|
Blocking the vent may cause cabinet |
|
damaqe and uoor bakino Derformancc. |
|
Electrical Shock Hazard
It is the customer’s responsibilrty:
’To contact a quahhed electrical
~installer.
’To assure that the electrical installation is adequate and in conformance with National Electrical Code, ANWNFPA 70.latest edition’, and all local codes and ordinances.
Failure to do so could result in fire, electrical shock or other personal injury.
Tools needed for installation:
Parts rovided for instal fation:
63
PANEL A
