Before You Call For Service
If you are having an operating problem, check the list to see what the cause might be before you call for assistance.
OPERATING PROBLEM |
|
| CHECK THAT |
| |||
Compactor | will | not run | . | Compactor is properly connected to | |||
|
|
|
|
| a live circuit with the proper |
| |
|
|
|
|
| voltage. |
|
|
|
|
|
| 1 Fuse has blown or circuit breaker | |||
|
|
|
|
| has tripped. |
| |
|
|
|
| . Drawer is completely closed. |
| ||
|
|
|
| . | The | all the | |
|
|
|
|
| way to START before releasing. | ||
Drawer | will | not open | 1 | Ram is all the way up. |
| ||
Trash | is not | compacting | . | Drawer | is loaded properly. |
| |
|
|
|
| 1 Compactor is l/3 filled. |
| ||
Not enough | compaction or force | . | Too many items are being put | in | |||
|
|
|
|
| drawer | before compacting. |
|
Bottles | do not | break | 1 | Bottles | are centered in drawer. |
| |
WHAT TO DO
Plug compactor into a properly grounded outlet. (See Installation Instructions.)
Replace fuse or reset circuit breaker.
Push drawer closed.
Restart by turning
Turn the
Reload drawer. If anything gets between the ram and the drawer, the ram will return to the “up” position without compacting.
Continue to put trash in compactor and run cycle. Drawer must be at least l/3 full before compactor will compact.
Use the compacting cycle frequently. Compacting works best when only a few items are loaded.
Load bottles on their side in the center of the drawer. Not all bottles will break every time, depending on the bottle and the trash below it.
Page 6
