Roper PXD1000 manual Build from cable with compatible Camera connector

Data19(+)	29	Blue/Green
Data18(+)	30	Green/Purple
Data17(+)	31	Gray/Purple
Data16(+)	32	Gray/Green
Data15(+)	33	Blue/White
Data14(+)	34	Brown/Tan
Data12(+)	35	Tan/Pink
Data13(+)	36	Gray/Yellow
Data11(+)	37	Brown/Purple
Data10(+)	38	Brown/Gray
Data9(+)	39	Tan/Green
Data8(+)	40	Green/Pink
Data7(+)	41	Pink/Yellow
Data6(+)	42	Tan/Yellow
Data5(+)	43	Gray/White
Data4(+)	44	Green
Data3(+)	45	Tan
Data2(+)	46	Purple
Data1(+)	47	Brown
Data0(+)	48	Blue
GROUND	49	Tan/Orange
GROUND	50	Orange/Pink

79	Green/Blue	Data19(-)
80	Purple/Green	Data18(-)
81	Purple/Gray	Data17(-)
82	Green/Gray	Data16(-)
83	White/Blue	Data15(-)
84	Tan/Brown	Data14(-)
85	Pink/Tan	Data13(-)
86	Yellow/Gray	Data12(-)
87	Purple/Brown	Data11(-)
88	Gray/Brown	Data10(-)
89	Green/Tan	Data9(-)
90	Pink/Green	Data8(-)
91	Yellow/Pink	Data7(-)
92	Yellow/Tan	Data6(-)
93	White/Gray	Data5(-)
94	Yellow	Data4(-)
95	White	Data3(-)
96	Orange	Data2(-)
97	Gray	Data1(-)
98	Pink	Data0(-)
99	Orange/Tan	+12V_FUSED
100	Pink/Orange	+12V_FUSED

a.Build from cable with compatible Camera connector

If you plan to build a cable using a compatible Camera connector then you will need a compatible mating cable plug for the PXD1000. The mating cable plug for the PXD100 is an AMP Amplimite .050 Series Cable Plug Connector, Series III (AMP PN: 749621-9) or equivalent

b.How long can the Digital Cable be? Imagenation recommends that the cables for the digital camera to PXD1000 be 10 meters in length or less. If cables are any longer than 10 meters, unpredictable results may occur. There is not an easy answer to this question for cables longer than 10 meters. Cables up to 10 meters should work for all cameras. Beyond 10 meters, the answer begins to depend more on the camera and the speed of the data than on the frame grabber. In general, the higher the speed, the shorter the cable. A 40MHz camera, for example, would need a shorter cable than a 20 MHz camera.

The problem with a long cable is that the wire sets up a distributed capacitance. It can change the timing of the bits. If the timing of the bits changes then the frame grabber will miss data. A high quality camera will have a guard band on the bits to compensate for some small timing changes.

LVDS is designed to allow cables up to several hundred feet, however, much of that depends on the camera and the frequency.

10