Ports Serial PCIe Card RC301-E, For Windows

zCompliant with PCI Express Base Specification 1.0a

zSupports 2 x UART serial port

zBuild in 16C550 compatible UART with 16 byte transmit-receive FIFO

zData transfer rate up to 115200bps

zPCI-Express X1

z2 x 9 pins serial connectors

zPCIe Serial Card 2 Ports

zDriver CD

zUser Manual

zWindows® 2000/XP/Server 2003

zPCI Express-enabled system with an available PCI Express slot

1.Turn Off the power to your computer.

2.Unplug the power cord and remove your computer’s cover.

3.Remove the slot bracket from an available PCIe slot.

4.To install the card, carefully align the card’s bus connector with the selected PCIe slot on the motherboard. Push the board down firmly.

5.Connect the system power source to the board’s power connector.

6.Replace the slot bracket’s holding screw to secure the card.

7.Replace the computer cover and reconnect the power cord.

Please make sure the board is installed before proceeding with driver installation.

1.At the Found New Hardware Wizard, click Next.

2.Select Search for a suitable driver for my device(recommended), and click Next.

Rosewill RC-301E user manual ports Serial PCIe Card RC301-E, For Windows, Features and Benefits