Rosewill RC-408, RC-407 user manual LED Definition, Stations Connection, Switches Connection

5/8 port External Power Gigabit Switch RC407/408 User Manual

LED Definition

Please refer to the following table for LED definition 5-Port ( RC407 )

8-Port ( RC408 )

LED	Status	Operation
Power	Steady Green	Power is on
	Off	Power is off
1000M	Steady Green	Connected as 1000Mbps
	Blinking Green	The port is transmitting/receiving data.
100M	Steady Green	Connected as 100Mbps
	Blinking Green	The port is transmitting/receiving data.
10M	Steady Green	Connected as 10Mbps
	Blinking Green	The port is transmitting/receiving data.

Stations Connection

Connect each station to the switch by twisted-pair cable. Plug one RJ-45 connector into a RJ-45 port of the switch, and plug the other RJ-45 connector into the station’s network adapter. Power on the switch and then system is ready.

For cable selection, refer to the following table.

Switches Connection

In making a switch interconnection, you could use any port to connect another switch with straight or crossover cable. As all the ports support auto MDI / MDI-X function, using a straight cable to make a switch-to-switch connection is allowed.

For cable selection, refer to the following table：

4