Rosewill user manual Hardware & Software Installation, Channel PCI Sound Card RC-702

7.1 Channel PCI Sound Card RC-702 User Manual

Hardware & Software Installation

It is recommended that you remove any previously installed sound card and drivers prior to installing this 7.1 Channel PCI Sound Card to avoid any conflicts. If previously installed drivers are not removed, this 7.1 Channel PCI Sound Card perhaps not function properly. (Note: If your computer has on-board sound you will need to disable it on the motherboard. For more information please see your computer’s documentation or contact your computer’s manufacturer.)

Driver Installation

For Windows® 2000, XP/2003/Vista/7 (32/64 bit)

1.Locate an available PCI slot on your computer, and insert this 7.1 Channel PCI Sound Card into the slot. Fasten the card to the case using a screw.

2.Start your PC. Windows® will detect the Sound Card find a “Multimedia Audio Controller” device. Click the “Cancel” button to cancel the driver installation for the device at this moment. The driver for this device will be installed in the next step.

3.Place the Driver CD into the CD-ROM drive. Click the Start button on the taskbar and click Run. Type “D:\RC-702\Setup.exe”. (Assuming you have placed the CD in

CD-ROM drive labeled as D).

4.Follow any on-screen instructions to complete the software installation.

5.Restart your system.

6.Once you have rebooted the computer, this 7.1 Channel PCI Sound Card is ready to be used.

2