RC211

Installation Instruction

 

 

 

 

4.Select Auto configuration. Press Enter.

5.Press Y to save your settings.

6.Press CTRL+E and then press Y to exit the setup.

7.Continue with conventional Fdisk and Format steps as if you are installing a conventional hard drive.

8.Your RAID configuration is complete. Please proceed to software installation section.

4.3. Creating a Mirrored-Striped Set (RAID 10)

1.As the BIOS boots, press CTRL+S or F4 to enter the raid bios utility.

2.Select Create RAID set. Press F2.

3.Select RAID 10 then press Enter.

4.Select Auto config. Press Enter.

5.Press Y and then press ESC to exit the setup.

6.Continue with conventional Fdisk and Format steps as if you are installing a conventional hard drive.

7.Your RAID configuration is complete. Please proceed to software installation section.

4.4. Creating Parity RAID (RAID 5)

1.As the BIOS boots, Press CTRL+S or F4 to enter the raid bios utility.

2.Select Create RAID set. Press Enter.

3.Select RAID 5 then press Enter.

4.Select Auto configuration. Press Enter.

5.Press Y to save your settings.

4.5. Creating JBOD Sets

1.As the BIOS boots, Press CTRL+S or F4 to enter the raid bios utility.

2.Select Create RAID set. Press Enter.

3.Select JBOD (Single) then press Enter.

4.Select JBOD Drives. Press Enter.

5.Select RAID size. Press Enter.

6.Press Y to save your settings.

Page 7
Image 7
Rosewill RC211 user manual Creating a Mirrored-Striped Set RAID, Creating Parity RAID RAID, Creating Jbod Sets