Rosewill RC411 user manual Driver Installation, For Windows 2000/XP/Server, For Windows Vista

Gigabit PCIe LAN Card RC411 User Manual

Driver Installation

For Windows® 2000/XP/Server 2003

Once the Windows® 2000, XP and Server 2003 startup. Gigabit Ethernet PCI Express Card will be detected by system. Following is the procedures for installing Gigabit Ethernet PCI Express Card driver under Windows® XP Service Pack 2 operating system.

1.When Found New Hardware Wizard Window pop-up, please click “Cancel” button to cancel the driver installation for the device at this moment. The driver for this device will be installed in the next step.

2.Please insert the CD driver bound with Gigabit Ethernet PCI Express Card into your CD-ROM Drive.

3.At the Windows desktop click Start, then Run.

4.Type D:\ RC-411\setup.exe, then click OK. (Change D:\ to match your CD-ROM drive letter)

5.Follow the on-screen instructions to complete the instructions to complete the installation to complete the installation.

6.Restart Windows to complete the installation.

For Windows® Vista

In Windows® Vista, when the system is booted up it automatically detects the Gigabit Ethernet PCI Express Card and install the Gigabit Ethernet PCI Express Card with in-build drivers. Following is the procedures for upgrading Gigabit Ethernet PCI Express Card driver under Windows® Vista operating system.

1.Please insert the CD driver bound with Gigabit Ethernet PCI Express Card into your CD-ROM Drive.

2.At the Windows desktop click Start, then Run.

3.Type D:\RC-411\Vista\setup.exe, then click OK. (Change D:\ to match your CD-ROM drive letter)

4.Follow the on-screen instructions to complete the instructions to complete the installation to

complete the installation.

Restart Windows to complete the installation.

3