Rosewill RCW604 user manual Connect the power adapter set

USB 2.0 To IDE Cable For 2.5"/3.5"/5.25" Drive With Power Adapter RCW604 User Manual

2. Connect the power adapter set.

3.Plug the 4 pin power adapter to your ATA/ATAPI device (There is no additional power needed for 2.5” HD)

4.Plug the power adapter to power source and turn on the power . (Please make sure the voltage is between 100~240V)

5.Plug the USB2.0 cable to PC and wait for PC auto-detection. Driver is needed only in old system such as Windows 98. Please inset the driver disk when your system can’t complete the installation process. Windows will auto-install after it detects the driver disk and choose the most suitable driver for your system.

(Please notice the direction of USB port)