COOLER
Installation instruction
WARNING
Improper Intallation will result in damage to the processor. Never switch on the computer system until the fan is connected on to the motherboard power connector.
STEP 1
ARemove the transparent cover
B
Grey thermal grease
Ensure the surface of the CPU die is perfectly clean.
STEP 2
CD
E
Ensure that all four
the opposite direction of the arrow ( picture C ). Place the cooler on the CPU aligning the push pins into the securing position on the motherboard ( Picture D and E ).
STEP 3
F
Clip attachment
Placing one hand on the cooler to hold it in position, use the other hand to secure the pins by pushing them down( Picture F ) until a locking click is felt or heard from each one
( secure the
STEP 4
G
Connect the CPU cooler fan to the motherboard power connector marked CPU FAN. This connector is keyed so the power lead can only be installed one way. If a connector marked CPU FAN is not apparent on the board,check the motherboard manual for fan connection information.
Uninstall Manual
WARNING
Improper Intallation will result in damage to the processor. Never switch on the computer system until the fan is connected on to the motherboard power connector.
STEP 1
Make sure the PC is turned off and disconnect the fan from motherboard power connector
(placing the PC in horizontal position is recommended ).
user manual
STEP 2
Turn the pins in the direction indicated by the arrows.( using a flat head screwdriver is recommended ).
STEP 3
Take off the cooler by lifting it up gently.
If the cooler still seems to be secured, try to ease the pins by retracting each pin individually.
Thank you for purchasing a quality Rosewill Product. Please register your product at : www.rosewill.com for complete warranty information and future support for your product.
