User Manual | ||
|
|
|
|
|
|
3.2PCI Adapter - RNX-G300(E)
zOpen your PC case and locate an available PCI on the motherboard.
zSlide the PCI Adapter into the PCI slot. Make sure that all of its pins are touching the slot’s contacts. You may have to apply a bit of pressure to slide the adapter all the way in. after the adapter is firmly in place, secure its fastening tab to your PC’s chassis with a mounting screw. Then close your PC.
zAttach the external antenna to the adapter’s antenna port.
zPower on the PC.
Figure
zIf the Found New Hardware Wizard displays, choose install the software automatically (Recommended), and click Next button. The driver will be installed automatically.
3.3USB Adapter - RNX-G100
zPower on your PC, let the operating system boot up completely, and login as needed.
zHold the adapter and insert it into a USB slot.
zIf the Found New Hardware Wizard displays, choose install the software automatically (Recommended), and click Next button. The driver will be installed automatically.
Figure
You have now completed the driver and hardware installation for the Adapter
4 Configuration your wireless adapter
zThe Wireless Client Configuration Utility screen will appear automatically.
5
