Wireless N Adapter RNX-MiniN1 User Manual
This chapter provides solutions to problems that may occur during the installation and
operation of the Wireless USB Adapter. Read the descriptions below to solve your problems.
1. The Wireless USB Adapter does not work properly.
Reinsert the Wireless USB Adapter into your PC’s USB slot. Right click My Computer
and select Properties. Select the device manager and click on the Network Adapter. You
will find the Adapter if it is installed successfully. If you see the yellow exclamation
mark, the resources are conflicting. You will see the status of the Adapter. If there is a
yellow question mark, please check the following:
Make sure that you have inserted the right adapter and installed the proper driver. If the
Adapter does not function after attempting the above steps, remove the adapter and do
the following:
Uninstall the driver software from your PC through Control Panel’s “Add or Remove
Programs”.
Restart your PC and repeat the hardware and software installation as specified in this
User Guide.
2. I cannot communicate with the other computers linked via Ethernet in the
Infrastructure configuration.
Make sure that the PC to which the Adapter is associated is powered on.
Make sure that your Adapter is configured on the same channel and with the same
security options as with the other computers in the Infrastructure configuration.
3. What should I do when the computer with the Adapter installed is unable to
connect to the wireless network and/or the Internet?
Check that the LED indicators for the broadband modem are indicating normal activity.
36