Wireless N Adapter RNX-N250PC User Manual
7.2 WPS Setup Examples 7.2.1 Example to Add to WPS Using PIN Method
WPS connection through PIN Method requires you enter the PIN
Code into the Wireless Router that you want to connect to.
1. Select "Enrollee" from the Config Mode drop-down list.
Figure 7-7
2. Click “Rescan” to update the available AP that supports
WPS.
Figure 7-8
3. Select the AP that you want to join to.
Figure 7-9
4. Click “PIN” to start the PIN entering process
Figure 7-10
You should see “PIN – Begin associating to xxx (your
AP)” in 5 like Figure 7-10; The process bar will start
- 39 -