Rosewill RNX-N250PCe FAQ

Wireless N Adapter RNX-N250PCe User Manual

FAQ

This chapter provides solutions to problems that may occur during the installation

and operation of the Wireless USB Adapter. Read the descriptions below to solve your

problems.

z Make sure that the PC to which the Adapter is associated is powered on.

z Make sure that your Adapter is configured on the same channel and with the

same security options as with the other computers in the Infrastructure

configuration.

z Check that the LED indicators for the broadband modem are indicating

normal activity. If not, there may be a problem with the broadband

connection.

z Check that the LED indicators on the wireless router are functioning properly.

If not, check that the AC power and Ethernet cables are firmly connected.

z Check that the IP address, subnet mask, gateway, and DNS settings are

correctly entered for the network.

z In Infrastructure mode, make sure the same Service Set Identifier (SSID) is

specified on the settings for the wireless clients and access points.

z In Ad-Hoc mode, both wireless clients will need to have the same SSID.

Please note that it might be necessary to set up one client to establish a

BSS (Basic Service Set) and wait briefly before setting up other clients. This

prevents several clients from trying to establish a BSS at the same time,

which can result in multiple singular BSSs being established, rather than a

single BSS with multiple clients associated to it.

z Check that the Network Connection for the wireless client is configured

properly.

z If Security is enabled, make sure that the correct encryption keys are

entered on both the Adapter and the access point.