Rosewill RWND-N1501UB / RWND-N1502UBE manual Package Content, Product Specification, Overview

Wireless N Adapter

RNWD-N1501UB/RNWD-N1502UBE

Quick Installation Guide

Wireless N Adapter RNWD-N1501UB/RNWD-N1502UBE Quick Installation Guide

1. Overview

Thank you for choosing Rosewill’s 802.11n Wireless USB adapter – RWND-N1501UB / RWND-N1502UBE. This chapter is to introduce you more about this Wireless Adapter.

1.1Package Content

Before getting started, please verify that your package includes the following items:

1.Rosewill RWND-N1501UB / RWND-N1502UBE 802.11n Wireless USB Adapter x 1

2.Resource CD x 1, including:

•Wireless Utility and Driver

•User Manual

•Quick Installation Guide

Note:

Make sure that the package contains the above items. If any of the listed items are damaged or missing, please contact with your distributor.

1.2 Product Specification

Chipset	Ralink RT5370
Standard	IEEE 802.11b/g/n
Bus Type	USB 2.0/1.1 Interface
Frequency Band	2.4GHz ISM (Industrial Scientific Medical Band)
Data Rate	11b: 1/2/5.5/11Mbps;
	11g: 6/9/12/24/36/48/54Mbps
	11n: up to 150Mbps
Output Power	11n:14dBm+/-1.5dBm
	11g:14dBm+/-1.5dBm
	11b:16dBm+/-1.5dBm
Security	WEP 64/128, WPA, WPA-PSK, WPA2,
	WPA2-PSK, TKIP/AES
OS support	Windows 2K/XP/Vista/7 (32/64bit); Linux Kernel 2.4
	and 2.6 series; Mac OS 10.5/10.6/10.7
Temperature	Operating: 32 ~ 104°F (0~40°C);
	Storage: -4 ~ 167°F (-20~75°C)
Humidity	Operating: 10% ~ 90% (Non-Condensing);
	Storage: 5% ~ 95% (Non-Condensing)	1

Wireless N Adapter RNWD-N1501UB/RNWD-N1502UBE Quick Installation Guide

1.3System Requirement

You must have at least the following

•A laptop computer/desktop PC with an available USB port

•At least a 300MHz processor and 32MB of memory

•Windows OS for Win2000, XP, Vista, 7; Mac OS X 10.5~10.6; or Linux OS under Kernel 2.4 and 2.6 series

•A CD-ROM Drive

•USB controller properly installed and working in the computer

•A 802.11n、802.11g or 802.11b Wireless (and ) Access Point/Router (for infrastructure Mode) or another 802.11n、802.11g or 802.11b wireless (and ) adapter (for Ad-Hoc; Peer-to-Peer networking mode).

2.Installation Guide

2.1Hardware Installation

•Please first connect the RWND-N1501UB / RWND-N1502UBE with the USB cable, then insert into the USB slot of your PC or NB.

•If the following window popup, please click Cancel or Close: ▪ Under Win XP

2

Wireless N Adapter RNWD-N1501UB/RNWD-N1502UBE Quick Installation Guide

▪ Under Windows Vista/Win7

2.2Installing Drivers and/or Utility

►Please insert the CD into your CD-rom drive

►Click on the Driver for

Windows OS in the CD to install driver and utility for Windows

3