Getting Started
Thank you for purchasing the Rotel RA-05 SE Stereo Integrated Amplifiier. When used in a high-quality music audio system, it will provide years of musical enjoyment.
The RA-05 SE is a full featured, high performance component. All aspects of the design have been optimized to retain the full dynamic range and subtle nuances of your music. The RA-05 SE has a highly regulated power supply incorporating a Rotel custom-designed toroidal power transformer. This low impedance power supply has ample power reserves, which enables the RA-05 SE to easily reproduce the most demanding audio signals. This type of design is more expensive to manufacture, but it is better for the music.
The printed circuit boards (PCB) are designed with Symmetrical Circuit Traces. This insures that the precise timing of the music is maintained and faithfully recreated. The RA-05 SE circuitry uses metal fiilm resistors and polystyrene or polypropylene capacitors in important signal paths. All aspects of this design have been examined to ensure the most faithful music reproduction.
The main functions of the RA-05 SE are easy to install and use. If you have experience with other stereo systems, you shouldn’t fiind anything perplexing. Simply plug in the associated components and enjoy.
The RR-AT94 Remote Control
Some functions can be done with either the front panel controls, or the supplied RR-AT94 remote control. When these operations are described, the call out number for both controls is shown. For example, you can adjust the volume with either the front panel Volume control -
or the remote control buttons f.
See the “IR Inputs and Outputs” section for more information on ways to expand the IR control capabilities of your system.
NOTE: Remove the batteries from the remote control if it will not be used for a long period of time. Do not leave run down batteries in the remote control. Exhausted batteries can leak corrosive chemicals which will damage the unit.
NOTE: The RR-AT94 can be used to operate the basic function of other certain other Rotel components, including Tuners, CD Players and DVD Players.
To operate a Rotel Tuner —
1)Select the tuner function of the RR-AT94.
2)Press “Power” and “1” (RT-06) or “2” (RT-940AX).
3)Press the key for Tuner operation.
To operate a Rotel CD Player —
Select the CD function of the RR-AT94
To operate a Rotel DVD Player —
Select the AUX 1 function of the RR-AT94.
Remote Sensor 6
The Remote Sensor picks up the infrared signals from the remote control. Do not cover or block the sensor. It must be unobstructed or the remote control will not work properly. The operation of the Remote Sensor can also be affected if it is exposed to bright light, particularly sunlight. Certain types of lighting, such as halogen lights, that emit a fair amount
of infrared light, can also interfere with proper operation. In addition remote control functions may not work reliably if the batteries in the RR-AT94 are weak.
A Few Precautions
WARNING: To avoid potential damage to your system, turn off ALL the components in the system when connecting or disconnecting the loudspeakers or any associated components. Do not turn the system components back on until you are sure all the connections are correct and secure. Pay particular attention to the speaker wires. There must be no loose strands that could contact the other speaker wires, or the chassis of the amplifier.
Please read this manual carefully. It provides information on how to incorporate the RA-05 SE into your system as well as information that will help you get optimum sound performance. Please contact your authorized Rotel dealer for answers to any questions you might have. In addition, all of us at Rotel welcome your questions and comments.
Save the RA-05 SE shipping carton and all enclosed packing material for future use. Shippingor moving the RA-05 SE in anything other than the original packing material may result in severe damage to your amplifiier.
Fill out and send in the owner’s registration card packed with the RA-05 SE. Also be sure to keep the original sales receipt. It is your best record of the date of purchase, which you will need in the event warranty service is ever required.
Placement
Like all audio components that handle low level signals, the RA-05 SE can be affected by its environment. Avoid placing the RA-05 SE on top of other components. Also avoid routing audio signal cables near power cords. This will minimize the chance it will pick up hum or interference.
The RA-05 SE generates heat as part of its normal operation. The heat sinks and ventilation openings in the amplifiier are designed to dissipate this heat. The ventilation slots in the top cover must be open. There should be 10 cm (4 inches) of clearance around the chassis, and reasonable airflow through the installation location, to prevent the amplifiier from overheating.
Remember the weight of the amplifiier when you select an installation location. Make sure that the shelf or cabinet can support it. We recommend installing the RA-05 SE in furniture designed to house audio components. Such furniture is designed to reduce or suppress vibration which can adversely affect sound quality. Ask your authorized Rotel dealer for advice about component furniture and proper installation of audio components.
Cables
Be sure to keep the power cords, digital signal cables and regular audio signal cables in your installation away from each other. This will minimize the chance of the regular audio signal cables picking up noise or interference from the power cords or digital cables. Using only high quality, shielded cables will also help to prevent noise or interference from degrading the sound quality of your system. If you have any questions see your authorized Rotel dealer for advice about the best cable to use with your system.
