Rotel RMB-1512 dimensions ChannelCustom Installation Amplifier, Description, Specifications

RMB-1512

12-Channel Custom Installation Amplifier

Description

No longer do you need to purchase several large amplifiers to obtain a high performance multizone audio system. The RMB-1512 features an advanced Class D design that provides plenty of power (12 x 100 watts into 8 ohms) for the most demanding mulitzone audio systems, but never runs the danger of overheating itself or other electronic components placed in the same vicinity. The RMB- 1512 features everything needed for remote operation and custom installation including 12 volt trigger signal sensing, input bussing, sum-to-mono, buffered link output, front panel attenuation control, five-way binding posts and screw terminals.

*Note – all Rotel 15 series components may be rack mounted and remotely controlled via RS-232, IR, or 12 volt (depending on model) for complete stealth operation.

Specifications

Power Output	100 watts x 12ch (20 Hz-20kHz, <0.03% THD, 8 ohms)
all channels driven	200 watts x 12ch (20 Hz-20kHz, <0.03% THD, 4 ohms)
IM Distortion	<0.02%
Damping Factor (8 ohms)	>200
Input Sens. / Impedance	1.25 V/9.9 k Ohms

Frequency Response (±1 dB)	10Hz-40kHz (+3dB)
S/N Ratio (IHF A)	109 dB
Dimensions (W x H x D) mm	431 x 144 x 407 mm
Dimensions (W x H x D) in	3U / 17 x 5 5/8 x 16 in

		www.rotel.com
The Rotel Co. Ltd.	Rotel of America	Rotel Europe
10-10 Shinsen-Cho	54 Concord St.	Dale Road
Shibuya-Ku,	N. Reading, MA 01864	Worthing
Tokyo 150, Japan	USA	West Sussex BN11 2BH, UK
	T +1 978 664 3820	T +44 (0) 1903 221 763
	F +1 978 664 4109	F +44 (0) 1903 221 525