Rover 10024 Removing the grass catcher- refer figure, Adjusting the height of cut- refer figure

Grass catcher hook

Flap rod

Grass catcher

Figure 2. Grass catcher fitment

Removing the grass catcher- refer figure 2

∙Move the throttle control lever to the stop position and wait till the blades come to a complete stop

∙Raise the rear flap of the mower with one hand and with the other hand lift the grass catcher up and away from the rear of the mower.

∙Lower the rear flap against the rear of the mower.

WARNING

The grass catcher should only be fitted or removed when the engine is stopped. Never raise the rear flap when the engine is running

Adjusting the height of cut- refer figure 3

The Rover lawnmower has ten height settings con- trolled by the height adjustment lever located at the rear right hand wheel.

∙Grasp the height adjustment lever and pull the lever away from the base to disengage the lever from the height adjustment rack.

∙Move the lever either forwards or backwards to the desired position and release the lever so as to engage in the height adjustment rack.

Height adjustment rack

Figure 3. Height adjustment	Height
	adjustment lever
4