VIII • WHAT TO DO IF … | english |
IMPORTANT!
As soon as your vacuum cleaner starts to malfunction, and before performing any checks:
•Stop the appliance by pressing the Start/Stop switch.
•Unplug the appliance.
Your vacuum cleaner will not start.
•The product is not connected to the mains Check that the product is correctly plugged in.
Your vacuum cleaner does not suck.
•Either a tool or the hose is blocked Unblock the tool or the hose.
Your vacuum cleaner suction power is effective, makes more noise than usual, and whistles.
•A tool or the hose is partially blocked Unblock the tool or the hose.
•The bag is full or blocked by fine dust Replace the bag or empty the cloth bag.
•The foam filter and microactive filter are full
Clean the foam filters and replace the microactive filter.
•The HEPA filter is full. Change the HEPA filter.
•The mecanical power control is open Close the mecanical power control.
•The electronic power control is in the min. position.
Increase power using the electronic power control (except when vacuuming delicate fabrics).
The dust bag full indicator is orange.
• The bag is full
Replace the bag or empty the cloth bag.
• The nozzle is difficult to remove
Open the mecanical power control or reduce its power.
The power cord does not fully retract.
• The cord slows down as it is retracted
Pull out the cord until completely extended and press on the retraction button.
If the problem persists contact our Helpline:
0845 602 1454 - UK (calls charged at local rate) (01) 412 3000 - IRELAND
