![](/images/new-backgrounds/1276582/27658211x1.webp)
• Never use the appliance if it is not working correctly, or if it has fallen (invisible damage to the | GB |
appliance could put your safety at risk). |
•When you are using the clipper, keep it well away from eyelashes, clothes and any other object, to avoid any risk of injury or blockage.
•If the clipper is used by several people, the cutting head should be cleaned appropriately.
•Close supervision is necessary when the appliance is used on or in the presence of children or disabled people.
•Never leave the clipper within the reach of children.
•Be careful when you are using the clipper for the first time.Take your time. Use slow, controlled gestures.
•Do not use the clipper on animals.
•Do not use the appliance:
-on injured skin.
-if you have dermatological problems: eczema, varicose veins, skin inflammations, moles, acne, warts, birth marks, etc.
• Special tools are required to dismantle this appliance. Any maintenance work must be carried out by the manufacturer, its
• Cutting and styling advice is offered purely as a guide, and Rowenta can not be held responsible in the event that the results obtained do not fulfil the user's expectations.
• For any malfunctions, see "Troubleshooting", or contact our Customer Helpdesk or your dealer.
4. 7-SETTING ADJUSTABLE COMB ATTACHMENT
•Your clipper is fitted with a comb attachment that allows you to choose the cutting length.
•To select one of the settings: push the comb to align it with the desired setting (Fig. 6).
•The cutting length (in mm) is shown on the sides of the clipper (Fig. 7) (3,6,9,12,15,18 or 21 mm). These values are purely indicative; the actual cutting length may vary according to the angle at which the clipper is held.
5. USING THE CLIPPER WITHOUT THE COMB ATTACHMENT
•For
6. CLEANING
•The clipper requires very little cleaning. You can clean it with a slightly damp cloth. To clean the adjus- table comb attachment, remove it as shown in fig. 8 and use the cleaning brush to remove any hair (Fig. 9).
•After each use, the cutting blades should be cleaned with the cleaning brush (Fig. 10).
7. LUBRICATION
•To maintain the performance of your clipper, it is essential to oil the cutting blades before each use with the lubricating oil provided, or failing this, with a
•Before lubricating the appliance, unplug it and use the cleaning brush to remove any hair caught in the cutting blades (Fig. 10).
•Lubricate the blades at the positions indicated (Fig. 11): a single drop at each position is sufficient.
•Operate the clipper for a few seconds.
•Wipe off any excess oil with a cloth.
8. ENVIRONMENTAL PROTECTION
At the end of your product's useful life, please take it to a
9. TROUBLESHOOTING
•The clipper doesn't cut any more: Have you lubricated the blades? (see paragraph 7)
•The clipper won't start (in cordless operation) or no longer has sufficient autonomy:
Have you recharged it?