Powerglide
30 sec. |
8 min. |
30 sec. |
Auto off is not an on/off switch. Unplug the iron when it is not in use.
Instructions for use
1(Depending on model.) If the iron is not moved while it is plugged in,
an internal safety switch will turn it off.
Filling with water
2Slowly remove the protective label/cover from the soleplate.
B C D E | F | G | H | I |
|
|
|
| J |
A |
|
|
|
|
| electr | onic |
|
|
|
|
|
|
Description
ASpray nozzle
BWater filling inlet
CVariable steam control with Self clean (Depending on model)
DSpray button
EBurst of steam button
FAuto off indicator light
(Depending on model)
GTemperature control dial
HFlexible cord protector
I Power cord |
It will turn off in 8 minutes if left verti- cally or in 30 seconds if left on its sole- plate or tipped over. A red flashing light indicates that the
ic |
electron |
Holding the iron vertical, pour water into the water filling inlet, up to the "max." mark on the water tank. Plug the iron into the outlet.
e |
l |
e |
c |
t |
r |
o |
n |
i |
c |
L | K |
J | Pilot light |
K | Stainless steel soleplate |
L | Transparent water tank |
Burst of steam
8To remove stubborn wrinkles or press in a sharp crease, use
the burst of steam button. Press the button firmly, a strong burst of steam penetrates deep into the fabric. Leave an interval of at least four seconds between pressing the burst of steam button. With water in the tank, the burst of steam button can be used as soon as the steam ironing temperature has been reached (● ● ●).
Vertical steaming
9(Depending on model.) Check packaging.
This is especially useful for getting wrinkles out of hanging clothes, curtains etc.
Warning! Never iron clothes on the body or point your iron at anybody when steaming!
IMPORTANT SAFETY INSTRUCTIONS
When using your iron, basic safety precautions should always be followed, including the following:
Read all instructions before using the iron.
1.Use iron only for its intended use.
2.To protect against a risk of electric shock, do not immerse the iron in water or other liquids.
3.The iron should always be turned to Min. before plugging or unplugging from outlet. Never yank cord to disconnect from outlet, instead grasp plug and pull to disconnect.
4.Do not allow cord to touch hot surfaces. Let iron cool completely before putting away. Loop cord loosely around handle when storing.
5.Always disconnect iron from electrical outlet when filling iron with water or emptying and when not in use.
6.Do not operate iron with a damaged cord or if the iron has been dropped or damaged. To avoid the risk of electric shock, do not disassemble the iron. Ship it to the nearest Rowenta Appliance Service Center for examina- tion and repair. Incorrect reassembly can cause a risk of electric shock when the iron is used.
7.Close supervision is necessary for any appliance being used by or near children. Do not leave iron unattended while connected or on an ironing board.
8.Burns can occur from touching hot metal parts, hot water or steam.
Use caution when you turn a steam iron upside down – there may be hot water in the water tank.
9.The use of accessory attachments is not recommended by Rowenta and may result in fire, electric shock or personal injury.
SPECIAL INSTRUCTIONS
1.This is a 1200 or 1400 watt appliance. To avoid a circuit overload, do not operate another high wattage appliance on the same circuit.
2.If an extension cord is absolutely necessary, a
3.After the iron has cooled, wrap the cord loosely around the handle.
4.Your Rowenta appliance is intended for household use only.
SAVE THESE INSTRUCTIONS
Rowenta Inc. |
|
196 Boston Avenue | Tel.: |
Medford, MA 02155 U.S.A. | www.rowentausa.com |
OFFICE LOCATION ONLY.
If your appliance needs service, ship the product to your nearest regional service center. If in warranty, Rowenta will repair or replace the product at their discretion. If the product is out of warranty, you will be advised of the cost of repair before any work begins.
Our main service centers are listed below:
Turnpike Appliance | Authorized Appliance |
3495A Lawson Blvd. | 1644 West Ogden Ave. |
Oceanside, NY 11572 | Downers Grove, IL 60515 |
Service center information is subject to change.
Please visit our website at www.rowentausa.com or call our service center information line at