NOT DX1700
Spray Setting
-This feature is ideal for stubborn or set in.
-Ensure there is water in the tank then press the spray button.
- Do not spray silk.
Anti-Drip System (depending on model)
- In order to produce steam, all irons require a high tempera- ture. If the soleplate is not hot enough some of the water will not turn to steam and can spit or leak from the soleplate. The
Anti-Calc System
-Minerals in water can build up in the steam chamber. The
Self Clean
Warning! Do not use descaling agents. They can damage the lining of the steam chamber.
This feature allows loose mineral deposits and other impurities to be flushed from the soleplate.
Self Clean should be carried out occasionally and at least once a month.
`
ANTI
CALC
ANTI DRIP
-Fill the iron with tap water to the max mark on the water tank.
-Be sure that variable steam lever is set to m minimum.
-Stand the iron on heel and plug in.
-Set thermostat to (•••) setting.
-Once heated, unplug iron.
-Hold iron horizontally over the sink with the soleplate pointing away from body.
-Move the variable steam lever completely to the right and hold in the self clean position for one minute.
Warning! Doing this will cause steam and hot water to be ejected from the soleplate. Take all proper precautions and hold iron away from body.
-Move the iron gently back and forth and side to side until all water has run through plate.
-Carefully wipe all water and material from the soleplate with an old towel, as the water and minerals can stain the sole- plate (although this has no effect on glide or performance).
