Note: Should any ‘coals’ or the coal bed become damaged, lost or broken, only the correct replacements must be obtained and fitted before the appliance is used. Extra ‘coals’ etc. must not be added to the coal bed. The coal bed must always be assembled as detailed.
This appliance is fitted with an Oxy/pilot the purpose of which is to monitor spillage in the event of a flue blockage or hazardous flue condition. This may cause the oxygen content of the room to become depleted; the flame then becomes extended which allows the thermocouple to cool sufficient to cause the FFD to cut off the supply of gas to the burner. If this occurrence is repeated, the appliance must not be used until a specialist has been consulted.
CLEANING THE FRONT OF THE APPLIANCE AND CLEANING THE WINDOW
The fire must be turned off and allowed to cool for approximately 2 hours. The paintwork should be cleaned with a soft cloth or soapy water. The brass trim can be cleaned with most proprietary brands of metal cleaners although care must be taken not to use abrasive materials. The glass window can be cleaned with most proprietary window cleaners.
To clean the coal bed or the inside of the glass panel refer to 5.1 & 5.2
SPARES AND SERVICE
For spares and service, apply to your local Supplier, Installer or direct to the manufacturer, stating that the appliance is a Royal Cheltenhan. Quote the GC Appliance Number and the Serial Number from the Data Badge located on the front control panel.
Advantage should be taken of regular servicing and inspection of gas appliances to ensure their continued safe operation.
SHORT PARTS LIST
Description | Qty | Crosslee Pt No | GC No | |
Complete coal & fibre pack | 1 |
| 42203 |
|
|
|
|
|
|
|
|
|
|
|
Page 6
