11. LOADING FILM
Royal Sovereign films are wound with the adhesive side facing the inside of the roll (adhesive in).
Loading films to the top and bottom film shafts: (See page 5 for assistance with parts identification).
11.1 Installation of the core plugs
1. Remove the top and bottom film shafts from the |
|
machine. | Figure 1 |
2.Load a roll of pressure sensitive film to the top film shaft (Figure 1). Center the film and tighten the core screws (Figure 2).
3. | Load a roll of mounting film or roll of craft paper to the | Figure 2 |
| bottom film shaft. Do not tighten the core screws at |
|
| this time.(Figures 3) |
|
Note: Please see the direction of the film on the top |
| |
and bottom shafts. |
| |
4. | Load the top and bottom film shafts onto the machine |
|
| (Figure 4 & 5). |
|
Figure 3
Figure 4 | Figure 5 |
9
RSC Series
11.2 Installation of the auto grip
1.Adjust the auto grip to fit to the film and tighten the auto grip screw (Figure 1 & 2).
Figure 1
2. Remove the upper and lower film shafts from the machine and load the films (Center the upper and
lower films on the shaft). Note the direction of the
adhesives on the lower and upper filmsFigure 2 (Figure 3 & 4).
Figure 3
3.Load the upper and lower film shafts on the machine (Figure 5 & 6).
Figure 4
Figure 5 | Figure 6 |
10
