Operation
6
External Connections & Controls
NOTE: The numbers refer to the callouts in Figure 1.
Figure 1. LMS-325 Connections and Controls
1. Volume Control
Use this control to simultaneously adjust the speaker
level for both speaker input lines.
2. 12-15 VDC Input Jack
The LMS-325 is powered from a Telex® Wall Pack
(part number 532006-000). Plug the Wall Pack inot the
12-15 VDC jack and into an AC outlet.
3. Balance Control
This control adjusts the relative level of the Input 1and
Input 2 (Channel 1 and Channel 2, respectively). Use a
small flat-blade screwdriver to adjust the
control.
4. Audio Input Jacks
These 1/4” monaural phone jacks can be used to
connect audio inputs from some other line-level
program sources (an auxiliary output from a radio or
tap player for example).
5. XLR Line Input Connector
This 3-pin female XLR jack can be connected directly
to an RTS™ intercom line. The RTS™ intercom line
may carry Channel 1, Channel 2, or both channels.
12-15 VDC
+
-
2
INPUT 2
LINE LEVEL
TELEX COMMUNICATIONS, INC.
MADE IN USA
LINE
INPUT 1
45
1
3
BAL
RTS LMS325 VOLUME