Fast

RUB TECH

R

Fast EthernetSwitch

Networking & Communications

Web Smart Switch
ES-1126C/D
ES-1126C/D:
24-Port Web-Smart Fast Ethernet Switch with 2 SFP/GBIC Gigabit Dual Media Ports

Switch Ethernet

Key Features Standard compliance---IEEE 802.3 10Base-T Ethernet (twisted-pair copper)---IEEE 802.3u 100Base-TX Ethernet (twisted-pair copper)---IEEE 802.3ab 1000Base-TX Ethernet (twisted-pair copper)---IEEE 802.3z 1000Base-TX/FX Ethernet---IEEE 802.3x flow control capability---ANSI/IEEE 802.3 auto-negotiation---IEEE 802.1q VLAN RoHS Complianc Subscriber Interface---1-24 10/100Mbps Fast Ethernet ports.---25,26 are Gigabit TP(SFP/GBIC) Fiber auto sense---Auto-Negotiation and Auto-MDIX---Backpressure flow control for half duplex.---802.3x flow control for full duplex.

---Connector: 24 RJ-45 and 25,26 dual media (RJ-45/SFP or RJ-45/GBIC)

PerformanceSwitching capacity:---Non-blocking switch fabric supports up to 24FE+2GbE, ports---8 K MAC addresses---256k packet buffer and 128k control memoryVLAN---Port-base VLAN---IEEE802.1q tag-base VLAN, 4094 max---Support Metro-mode to easily configure for MANQos---Port Based, 802.1p based QoS packet classification

---Supports four level priority queues to prioritize in-bound and out-bound traffic

Port Trunk---2 Fast Ethernet +1 Gigabit Ethernet groups---Per-group max 4 member---Mac-based trunking with automatic link fail-over
Benefits QoS with Four Priority Queues

The QoS(Quality Of Service) feature provides four internal queues to support four different classifications of traffic. High priority packet streams experience less delay inside the switch, which supports lower latency for certain delay- sensitive traffic. The ES-1126C/D can classify the packet as one of the four priorities according to 802.1p priority tag. The QoS operate at full wire speed. The actual scheduling at each egress port can be based upon a strict priority, weighted round robin or a mix of both.

Port Mirroring

This mechanism helps track network errors or abnormal packet transmission without interrupting the flow of data. Allow ingress traffic to be monitored by a single port that is defined as mirror capture port. The mirror capture port can be any 10/100 port, 10/100/1000 port. Mirroring multiple ports is possible but can create congestion at the mirror capture port.

VLAN for Performance & Security

The VLAN feature in the switch offers the benefits of both security and performance. VLAN is used to isolate traffic between different users and thus provides better security. Limiting the broadcast traffic to within the same VLAN broadcast domain also enhances performance.

Isolated Group, Provide Secure for Certain Ports

The isolated group feature allows certain ports to be designated as protected. All other ports are non-isolated. Traffic between isolated group members are blocked. Traffic can only be sent from isolated group to non-isolated group.

Mac-based Trunking with Automatic Link Fail-over

Dynamic fail-over means packets will not get assigned to any trunk member port that has failed. If one of the ports were to fail, traffic will automatically get distributed to the remaining active ports.

Trap Event for Exception Management

We use SNMP Trap mechanism to inform supervisor to know the instant abnormal status of the switch.

2 Dual Media for Flexible Fiber Connection

25, 26 dual media port are provided for flexible fiber connection. You can select to install optional transceiver modules in these slots for short, medium or long distance fiber backbone attachment. Use of the SFP will disable their corresponding built-in 10/100/1000Base-T connections.

Build-in Web-base Management

Instead of using CLI interface, we provide a more convenient GUI for user. We just need to configure switch via Web Browser. It is more quickly for user to familiar the method to control switch on the basis of this design.