Ruby Tech ES-2310C RUB TECHTECH, 14,880PPS, 10Mbps, 148,800PPS, 100Mbps, 1,488,000PPS, 1000Mbps, Technical Specifications, Forwarding Rate, Speed

Switch Ethernet Fast

R

RUB TECHTECH

Networking & Communications								Fast EthernetSwitch
									L2 Managed Switch
---Flooding unknown VLAN frame setting,		or long distance fiber backbone attachment. Use of the SFP/GBIC will disable
can flood packet with some VLAN tag		their corresponding built-in 10/100/1000Base-T connections.
associated to a invalid/inactive VLAN		Broadcast/Multicast/unknown-unicast Storm Control
---In tag-base VLAN, supports egress/		To limit too many broadcast/multicast/unknown-unicast flooding in the
ingress packet filter		network, broadcast/multicast storm control is used to restrict excess traffic.
---Q-in-Q is an efficient method for		Threshold values are available to control the rate limit for each port. Packets
enabling Subscriber Aggregation		are discarded if the count exceeds the configured upper threshold.
Qos
---Port Based (VIP Port), 802.1p , TOS	Technical Specifications
and Diffserv(IPv4/IPv6) based QoS		LED Description
packet classification				LED	Color			Function
---Supports four level priority queues to		Global	POWER		Green		-Lit when +5V power is coming up
prioritize in-bound and out-bound traffic		Global	CPU		Green		-Blinks when CPU is active
---Supports two scheduling, WRR and		Port	LINK/ACT		Green		-Lit when connection with remote device
Strict		1-8					is good
---Supports priority in a Q-in-Q tag							-Blinks when any traffic is present
Bandwidth Control		Port	10/100/		Green		-Lit Green when TP link on 1000Mbps
---Supports bandwidth rating per port		1-8	1000Mbps		/Amber		speed
ingress and egress rate limit 1000Mbps							-Lit Amber when TP link on 100Mbps
with 1Mbps increment							speed
Broadcast Storm							-Off when 10Mbps or no link occurs
---Multicast/Broadcast/Unknown-Unicast		Port	SFP		Green		- Lit when SFP/GBIC connection with
Storm suppression.		9,10					remote device is good
Transmission Mode							-Blinks when any traffic is present
---10/100Mbps support full or half duplex		Network Interface
1000Mbps support full duplex only		Category		Connector		Transmission			Max. Cable	Wavelength
Transmission Speed									Length
---10/100/1000Mbps for TP 1000Mbps		10-T/		RJ-45		Full/Half Duplex			100M	/
for Fiber		100-TX
Port Mirroring		1000-T		RJ-45		Full Duplex			100M	/
---Support 1: N RX port mirroring		1000-SX		LC		Full Duplex			220M	850nm
---Supports port sniffer function with 3		(M-M)							50/125
modes:		1000-SX		LC		Full Duplex			10KM	1310nm
(TX Monitor Mode, RX Monitor Mode		(S-M)							9/125
and TX-RX pair Monitor Mode)
Isolated Group		Full Forwarding Packet Rate: PPS (64 Bytes packets per second)
---Provide one group allows certain ports
		Forwarding Rate							Speed
to be designated as protected
		14,880PPS							10Mbps
Restricted Group
		148,800PPS							100Mbps
---Can decide the direction of transmitting
packets for the specific port		1,488,000PPS							1000Mbps
Protocol
LACP		Cable and Maximum Length
---2 Fast Ethernet +1 Gigabit Ethernet		Feature						Detailed Description
groups
		TP					Cat. 5 UTP cable, up to 100m
---Per-group max 4 member
		1000Base-SX SC M-M					Up to 220/275/500/550m,
---Provides DA, SA and DA+SA Mac-
							which depends on Multi-Mode Fiber type
based trunking with automatic link
		1000Base-LX SC S-M					Single-Mode Fiber, up to10/30/50Km
fail-over
		1000Base-FX WDM SC S-M					Single Fiber, BiDi 10Km
GVRP/GARP
---1.802.1q with GVRP/ GARP		Hardware Spec
Multicasting		Feature						Detailed Description
---Supports IGMP snooping including
		Voltage					100~240 VAC
active and passive mode
		Frequency					50~60 Hz
STP/RSTP
		Consumption					11.6W
---802.1d/1w
Network Security		Ambient Temperature					0 to 40 C
---802.1x access control		Humidity					5% to 90%
---Isolated group		Dimensions					44(H) x 220(W) x 130.5(D) mm
---Restricted group
		Safety					Comply with FCC Part 15 Class A & CE
---Management Access Policy Control
							Mark Approval