RUB TECH

R

Gigabit Switch

Networking & Communications

Web Smart Switch

GS-1108C

GS-1108C:8-Port Web-Smart Gigabit Ethernet Switch with 2 SFP Dual Media

Switch Gigabit

Key Features Standard compliance
---IEEE 802.3 10Base-T Ethernet (twisted-pair copper)
---IEEE 802.3u 100Base-T Ethernet (twisted-pair copper)
---IEEE 802.3ab 1000Base-T Ethernet (twisted-pair copper)
---IEEE 802.3z 1000Base-X Ethernet
---IEEE 802.3x Flow Control capability
---ANSI/IEEE 802.3 Auto-negotiation
---IEEE 802.1q VLAN
RoHS Compliance Subscriber Interface
---8 Gigabit Ethernet ports
---Auto-negotiation
---Auto-MDIX
---Back pressure flow control for half duplex
---Flow control for full duplex.
---Port 7,8 are TP/SFP Fiber auto sense
---Connector: 8 RJ-45 and 2 SFP module
PerformanceSwitching capacity:

---16 Gbps forwarding bandwidth for switch, non-blocking switch fabric

---Wire speed performance
---8 K MAC addresses
---144KB on-chip frame buffer.
---Jumbo frame support.
VLAN
---Port-base VLAN
---IEEE802.1q tag-base VLAN, 4094 Max
QoS
---Supports Layer 4 TCP/UDP Port and ToS Classification
---Supports 802.1p QoS with two level priority queue
Bandwidth Control

---Supports bandwidth rating per port ingress and egress rate limit 1000 Mbps with 1Mbps increment

Port Trunk
---Port trunking with 4 trunking groups
---Up to 8 ports for each group
Broadcast Storm
---Broadcast Storm suppression
Port Mirroring
---All port support port mirroring
Benefits Noise free fanless design for home and SOHO users

Home and SOHO users are always working in a small and limited space, therefore, noise free fanless switch becomes necessary and important.

QoS supports layer 4 classification

The switch supports not only Layer 2 802.1p Priority Queue control, but also supports programmable higher layer classification and prioritization to enable enhanced Quality of Service (QoS) support for real time applications base on information taken from Layer 2 to Layer 4, such as VoIP.

Port Mirroring

Port mirroring copies traffic from a specific port to a target port. This mechanism helps track network errors or abnormal packet transmission without interrupting the flow of data.

VLAN for performance & security

The VLAN feature in the switch offers the benefits of both security and performance. VLAN is used to isolate traffic between different users and thus provides better security. Limiting the broadcast traffic to within the same VLAN broadcast domain also enhances performance.

Port Trunk for Bandwidth Aggregation

The Gigabit ports can be combined together to create a multi-link load-sharing trunk. Up to 4 Gigabit ports can be set up per trunk. The switch supports up to 4 trunking groups. Port trunks are useful for switch-to-switch cascading, providing very high full-duplex speeds.

Trap Event for Exception Management

We use SNMP Trap mechanism to inform supervisor to know the instant abnormal status of the switch.

2 Dual Media ports for Flexible Fiber Connection

Port 7, 8 dual media ports are provided for flexible fiber connection. You can select to install optional transceiver modules in these slots for short, medium or long distance fiber backbone attachment. Use of the SFP will disable their corresponding built-in 10/100/1000Base-T connections.

Build-in web-base management

Instead of using CLI interface, we provide a more convenient GUI for user. We just need to configure switch via Web Browser. It is more quickly for user to familiar the method to control switch on the basis of this design.