RUB TECH | R | |
Gigabit Switch | ||
Networking & Communications |
L2 Managed Switch
GS-2108C
GS-2108C: 8-Port GbE L2 Managed Switch with 2 SFP Dual Media
Switch Gigabit
---IEEE 802.3x flow control capability
---IEEE 802.1q VLAN
---IEEE 802.1p QoS
RoHS Compliance PerformanceSwitching Capacity:---8 K MAC addresses
---144KB on-chip frame buffer
---Supports Jumbo frame, up to 9K
---Broadcast/Multicast Storm
Suppression
---Port Mirroring
VLAN---Port-base VLAN
---IEEE802.1q tag-base VLAN, up to 256 active VLANs
---Up to 16 Switches can be managed via Single IP
----Virtual stacking, no extra stacking hardware is required
----Distributed stack, no physical central wiring closet is needed
QoS---Supports Layer 4 TCP/UDP port and ToS classification
---Supports 802.1p QoS with two level priority queue
---Supports priority in a Q-in-Q tag
Bandwidth Control---Port trunking with 4 trunking groups
---up to 8 ports for each group
GVRP/GARP---802.1q with GVRP/ GARP
MulticastingHome and SOHO users are always working in a small and limited space, therefore, noise free fanless switch becomes necessary and important.
2 dual media ports for flexible fiber connectionPort 7, 8 dual media ports are provided for flexible fiber connection. You can select to install optional SFP transceiver modules in these cages for short, medium or long distance fiber backbone attachment. Use of the SFP will disable their corresponding
The switch supports not only Layer 2 802.1p Priority Queue control, but also supports programmable higher layer classification and prioritization to enable enhanced Quality of Service (QoS) support for real time applications based on information taken from Layer 2 to Layer 4, such as VoIP.
Port Mirroring helps supervisor monitoring networkPort mirroring copies traffic from a specific port to a target port. This mechanism helps track network errors or abnormal packet transmission without interrupting the flow of data.
The VLAN feature in the switch offers the benefits of both security and performance. VLAN is used to isolate traffic between different users and thus provides better security. Limiting the broadcast traffic to within the same VLAN broadcast domain also enhances performance.
The Gigabit ports can be combined together to create a
802.1x features enable user authentication for each network access attempt. Port security features allow you to limit the number of MAC addresses per port in order to control the number of stations for each port. Static MAC addresses can be defined for each port to ensure only registered machines are allowed to access. By enabling both of these features, you can establish an access mechanism based on user and machine identities, as well as control the number of access stations.
802.1D compatible & 802.1w rapid spanning treeFor mission critical environments with multiple switches supporting STP, you can configure the switches with a redundant backup bridge path, so transmission and reception of packets can be guaranteed in event of any switch on the network.