Runco VX-2000d manual On / OFF, Cursor Buttons, Menu button see below to exit the menu, Video

Controls and Functions

1.IR OUTPUT INDICATOR

Lights when a button is pressed to indicate that an IR signal is being transmitted.

2.ON / OFF

Press to turn the projector on or off.

3.ENTER

Press to select a highlighted menu item or confirm a changed setting.

4.Cursor Buttons (, , , )

Use these buttons to select items or settings, adjust settings or switch display patterns.

When no menu is present on-screen, the UP and DOWN buttons toggle through the available aspect ratios, in this order:

UP Button = 16:9 - 4:3 - Letterbox - VirtualWide - Cinema - Virtual Cinema DOWN Button = Virtual Cinema - Cinema - VirtualWide - Letterbox - 4:3 - 16:9

Note	Virtual Cinema is available only on the VX-2000d/CineWide. For
	more information about aspect ratios, refer to Table 4-1.

Likewise, the LEFT and RIGHT buttons toggle through the different source inputs, in this order:

LEFT Button = HDMI 2 - HDMI 1 - HD/RGB2 - HD/RGB 1 - Component SD - S-Video 2 - S-Video 1 - Composite

RIGHT Button = Composite - S-Video 1 - S-Video 2 - Component SD - HD/RGB 1 - HD/RGB 2 - HDMI 1 - HDMI 2

The “direct select” function of the UP, DOWN, LEFT and RIGHT

Note buttons is available only on the analog inputs (HD/RGB, SD

Component, Composite and S-Video).

5.RETURN / EXIT

Press this button to exit the current menu or cancel an operation.

Note	Not all remote control units have this button. If yours does not, use
	the MENU button (see below) to exit the menu.

6.LIGHT

Press to illuminate the buttons.

7.MENU

Press this button to show or hide the OSD controls.

8.VIDEO (1)

Press to select Composite video input as the source or to enter the numeric character “1.”

9.COMP (Component) (2)

Press to select Component SD (480i/576i) video input as the source or to enter the numeric character “2.”

Runco VX-2000d Owner’s Operating Manual 13