Read the instructions, keep them safe, pass them on if you pass the appliance on. Remove all packaging, but keep it in case you ever need to return the appliance.
important safeguards
Follow basic safety precautions, including:
1This appliance must only be used by or under the supervision of a responsible adult. Use and store it out of reach of children.
2Don’t put the kettle, stand, cable, or plug in liquid. Don’t use the kettle in a bathroom, near water, or outdoors.
3The scald hazard lasts long after boiling. Keep the kettle, stand, and cable away from the edges of worktops and out of reach of children.
4Route the cable so it doesn’t overhang, and can’t be tripped over or caught.
5Don’t touch hot surfaces (kettle body, lid, stand).
6Don’t open the lid while the water is heating.
7Don’t remove the kettle from the stand while the dispenser is operating.
8Take care when pouring – pour slowly, and don’t
9Don’t switch the dispenser on without filling the kettle at least to the min mark.
10Don’t switch the kettle on unless it’s full to at least the min mark, after the dispenser reservoir has filled itself.
11Don’t fill the kettle past the max mark, or it may spit boiling water.
12Remove the kettle from the stand before filling or pouring.
13Unplug the stand when not in use, before moving and before cleaning. Let the kettle cool down before cleaning and storing away.
14Check the lid is fully closed before switching the kettle on, or it may not switch off.
15Keep the kettle, stand, cable, and plug away from sources of heat.
16Don’t use the appliance for any purpose other than heating water.
17Use the kettle only with the stand supplied (and vice versa).
18This appliance must not be operated by an external timer or remote control system.
19Don’t use the appliance if it’s damaged or malfunctions.
20 If the cable is damaged, return the appliance, to avoid hazard.
household use only
before using for the first time
1Fill the kettle to the max mark.
2 Boil the kettle.
3 When the kettle has boiled, sit a 240ml cup on the cover, under the nozzle, and switch the dispenser on.
4 Wait till the kettle and dispenser have cooled.
5 Discard the water in the kettle and cup.
6 Rinse the kettle.
positioning
7 Put the stand on a stable, level surface.
8Route the cable so it doesn’t overhang, and can’t be caught or tripped over.
9Wind excess cable beneath the stand.
3