Russell Hobbs RH1042 Running the machine

Child lock is used in order to protect the washing cycle from the effects of unwanted

button activations during the cycle. The Child lock is activated by pressing the first

and third button on the control panel at the same for more than 3 seconds. W hen

child lock is activated LEDs on the function buttons will blink to indicate that Child

Lock is active. In order to deactive Child Lock, the same buttons (1st and 3rd) should

be pressed again for more than 3 seconds. Deactivation of Child Lock is shown by

blinking of the LED on the Start/Pause button.

Running the machine

Select an appropriate programme for your clothing by turning the main knob.

By pressing this b utton, you can start the programme you have selected or pause a

running programme.

 Adjust the programme knob to the programme you desire.

 The programme ready light will be on.

 If you want, you can select one or more additional functions.

 Run the programme which you have selected by pressing the Start/Pause

button.

If you have selected a programme and you want to continue with another:

 Press the Start/Pause button.

 Bring the program knob to the O (off) position.

 Adjust the programme knob to the programme you desire, (you can select the

program that you desire from Table 1).

 The programme ready light will be on.

 By pressing the Start/Pause button, run the programme which you have

selected.

To end a programme early:

 Press the Start/Pause button.

 Turn the programme knob to O (off) position.

 Turn the programme knob to “Draining” or “Spinning” programmes.

 The programme ready light will be on.

 Run the programme you have selected by pressing the start/pause button.

 Your machine will automatically stop when the program me you have selected

ends.

 The programme end light will be on.

 Turn the programme knob to the O (off) position.

For Customer Services, Spare Parts & Manufacturer's Warranty Information please call 0845 208 8750

-17-