Installation

Water drainage

Never forget to install drain hose before operating your washer.

The water drain hose should be mounted at a height of minimum 60 cm, maximum 100 cm from the ground.

The end of the water drain hose can be fitted directly to the drainage hole on the back side of the washer.

When installing the drain hose pipe, secure it tightly with a string.

Never attempt to extend the water drain hose by adding extra parts.

If the drain hose is too long, do not force it back into the washer. This will cause abnormal noise and damage to the product.

For Customer Services & Spare Parts please call 0845 208 8750

Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit

us at www.productcareuk.com

10

Page 10
Image 10
Russell Hobbs RHWM81400DIDB instruction manual Water drainage