Russound A-SRC1 user service Yba, Rca, Nsc, Lxi, Adc, Amw, Mcs, Mtc, Nec, Nsm, Jvc, Gpx, Jbl, Klh

ALL	A-BUS “All off” command
OFF

If your device does not respond to the remote after trying all codes listed for your brand, or if your brand is not listed, try searching for your code:

above, or the Troubleshooting tips below, before beginning again at step 1.

7. To program another key for the same source,

Wards	30078, 30211, 30013
Yamaha	30354, 30143, 30133, 30504
YBA	31502

Qisheng	31609, 31390
Quasar	30039
RadioShack	31263
RCA	31023, 31609, 31254, 30346, 30531,

NSC	00063, 00156
Oak	00019, 00007
Optimus	00021
Pace	01877, 00237

Luxman	30093
LXI	30305
Magnavox	30157, 30305
Marantz	30626, 30029, 30157, 30180

A-SRC1

A-BUS® LEARNING &

PRE-PROGRAMMED REMOTE CONTROL

USER GUIDE

SLEEP

A-BUS “sleep” command

Skip backward, rewind, fast forward, skip forward, stop pause, or play tracks on disc.

Use Page Up/Down with cable or satellite boxes. Note: May have to learn in these functions.

Issues CCTV1 or CCTV2 command.

1.Press a device key once.

2.Press and hold SETUP until the red LED blinks twice, then release.

3.Enter 9-9-1, then the device group number (see below). The LED blinks twice.

	0	Cable (Cable Converters,
		Video Accessories, Satellite
		Receivers)
	1	TV (TVs)
	2	VCR (VCRs, DVD players)
	3	Audio (Audio Amplifiers,
		Audio Amp/Tuners,
		CD players)
4.	Aim the remote at the device and press
POWER. The remote sends IR codes from its library
to the selected device, starting with the most popu-

repeat steps 5-6. To program another device, repeat

steps 1-6. Press and hold SETUP to exit program-

ming.

Deleting a single learning key

1.	Select a source.
2.	Press and hold SETUP until the LED flashed
twice.
NOTE: If more than 15 seconds passes between key
presses, the remote exits programming.
3.	Press 9 7 6.
4.	Press the key (twice) containing the learned
function to be deleted. The remote blinks twice.
5.	Repeat steps 2-4 for another key on the same
source, or press and hold SETUP to exit program-
ming.

Setup Codes for Audio Amp/Tuners

ADC	30531
Adcom	31616, 30616, 31617
Aiwa	31405, 30158, 30189, 31243, 31089,
	31388, 30121, 30405, 31321, 31641, 31347
Akai	30224, 30076, 31512, 31255
Alco	31390
Amphion Media Works 31615, 31563
AMW	31563, 31615
Anam	31609, 31074, 30281
Apex Digital	31430, 31257
Arcam	31120
Audiophase	31387
Audiotronic	31189
Audiovox	31390, 31627
AVLight	30158
Bel Canto Design 31584

	31154, 31511, 30080, 30530, 31074,
	31390, 30054, 30360
Realistic	30195, 30181, 30163
Regent	31437
Rio	31869, 31383
Saba	31519
Samsung	31500, 31295
Sansui	30189, 30346, 30193, 31089
Sanyo	30801, 30360, 31469, 30219, 31251
Scott	30163, 30322
Sharp	31286, 30186, 31386, 31361
Sharper Image	31545, 31556, 30797, 31409, 31416,
	31549, 31385, 31411, 31546, 31723,
	31263, 31410
Sherwood	30491, 31423, 30062, 31077, 30502, 31653
Shinco	31390
Shinsonic	31426
Silsonic	30176, 31426

Panasonic	00000, 00008, 00107, 00040, 00021
Panther	00637
Paragon	00000
Philips	00317, 00027, 00025, 00153, 00013,
	00031, 01305
Pioneer	01877, 00877, 00144, 00533, 01021
Popular Mechanics 00400
Pulsar	00000
Quasar	00000
RadioShack	00015, 00883, 00797, 00315
RCA	00021
Realistic	00207
Recoton	00400
Regal	00279, 00273, 00259, 00020
Regency	00002
Rembrandt	00011
Runco	00000

Mark Levinson	31484
McIntosh	30287
MCS	30029, 30043
Miro	30000
Mission	30157
MTC	30420, 30625
Nakamichi	30147
NEC	30043, 30234
Nikko	30174, 30170, 30164, 30625
NSM	30157
Onkyo	30868, 30101
Optimus	31063, 30000, 30032, 30037, 30342,
	30437, 31075, 30145, 30194, 30305,
	30426, 30087, 30179, 30280, 30420,
	30468, 30175, 30196
Panasonic	30029, 30752, 30303
Parasound	30420, 30194

ON	OFF	ALL	SLEEP
		OFF

ZONE

DISC

INTRODUCTION

The A-SRC1 Remote Control is designed for use with the Russound A-BUS A-C68 controller and system keypads (A-KP3,A-K5L and A-KSC). It is designed to operate source devices and the audio system key- pads. The A-SRC1 controls up to seven devices (six A-BUS sources and one local source). For best results, please read and follow all the remaining instructions and keep this guide for future reference.

FEATURES AND FUNCTIONS

Note: S1 - S6,Vol +/-, Mute and Power are system commands and are the same for any source. All other buttons are dependent upon the device code associated with the source and may vary from device to device.

The following Key Charts provide a general descrip- tion of button functions.

Key Charts

Select an A-BUS device. Issues an S# command and changes the mode of the remote to control the source.

	Toggle the selected A-BUS zone power on
	or off. Has talkback LED for programming
	and confirmation.
	Program sequences.
	Select next/previous.
	Select the next/previous chapter on some
	models of DVD players.
	Press LAST to recall the last-viewed channel.
	Raise or lower the sound level.
	Press MUTE to turn the sound off or on.
	Select local source.
DISC	Input (prefix) command for track,
	channel, etc.
	Move the cursor in menu screens.
	Press OK to choose the high-lighted menu
	option. Performs “Enter” function for
	devices.
	Press Enter to choose the high-lighted
	menu option. Performs “OK” function
	(suffix command) for devices.
ON	OFF	A-BUS “on” and “off” commands.

View the current channel and program information.

Display the menu for the selected device.

Exit the selected device’s menu, guide, or program without making a menu selection.

Display the program guide for the selected device.

Change inputs on selected device.

Press LAST once to recall the last channel and to page back one screen in the main menu.

Third-party command. Note: may have to learn in this function.

Directly enter channels (e.g., 09 or 31). Press OK to send channel number entries on some TV models.

INSTALLING BATTERIES

1.On the back of the A-SRC1, push the tab and lift off the battery cover.

2.Obtain two (2) fully-charged AA alkaline bat- teries. Match the + and – marks on the batter- ies to the + and – marks in the battery case, then insert the new batteries.

3.Press the battery cover back into place. The tab should click when the cover is locked.

4.Test the unit by pressing Power and any mode key. If the batteries are inserted correctly, the LED will blink once.

PROGRAMMING A DEVICE

Note: S1 - S6,Vol +/-, Mute and Power are system commands and are the same for any source. All other buttons are dependent upon the device code associated with the source.

Before proceeding, find the codes for the devices you want to program in, under “Manufacturer’s Codes” in this manual. To control Universal TV,VCR or DVD, Cable or Satellite Receivers,Amplifier or Tuner, and Auxiliary devices, follow these steps.

1.Turn on the device (e.g., DVD player) and if needed, load media.

2.Press a device key (S1 - S6).

3.Press and hold SETUP until the red LED blinks twice, then release.

4.Enter the first five-digit code for your device.The LED blinks once as each digit is entered. If the code is valid, the LED blinks twice.

Note: If the LED does not blink twice, repeat steps 2 to 4 and try entering the code again.

5.Aim the remote at the device and press a function button. The device should in turn perform the requested function. If it does not, repeat steps

3-5, trying each code for your brand until you find a code that works. If you cannot find a code that works see “Searching for Your Code” in this manual.

6.Repeat steps 1-5 for the other devices you want to control. For future reference, write down each working device code.

SEARCHING FOR YOUR CODE

Note: S1 - S6,Vol +/-, Mute and Power are the same for any source. All other buttons are dependent upon the device code associated with the source.

lar code first. If the device responds, go to step 6.
5.	If the device does not respond, press CH+. the
remote will try the next code. Continue until the
device responds. Press CH- to try the previous code.
6.	Press SETUP to lock in code. To search for
other device codes, repeat steps 1-5.

CHECKING THE CODES

If you have set up the remote using the procedure in “Searching for Your Code,” you may need to find out which five-digit code is operating your equipment.

For example, to find out which code is assigned to your TV:

1.Press the S# key to which the TV is assigned.

2.Press and hold SETUP until the red LED blinks twice, then release.

3.Enter 9 9 0. The LED blinks twice.

4.To view the code’s first digit, press 1. Count the LED blinks (e.g., three blinks =3), and enter the number in the appropriate device list in step 6 of “Programming a Device.” If a code digit is 0, the LED does not blink.

5.Repeat step 4 for the remaining digits, using 2 for the second digit, and so on.

6.To check for other device codes, repeat

steps 1-5, using the appropriate S# key.

USING LEARNING

The A-SRC1 includes a Learning feature so you can add functions that are unique to your home enter- tainment devices (e.g.,VCR Tracking Up or Down). The following precautions apply.

•The original remote controls must be in working order for learning to work properly.

•Learned keys are mode specific, so each one can store a unique function for each mode.

•Do not use the following keys for learning: Device Keys, SETUP, BACK, or Record.

•Learning capacity is approximately 40 to 100 keys, depending on the code being learned.

•Certain device codes are not learnable including multi-frequency types, some high frequency ones, and other unusual formats.

•For optimum learning, avoid high levels of ambient light such as natural sunlight or energy-efficient flu- orescent lights.

•Have the original remote controls handy before programming learning.

Programming a learned key

Note: If more than 15 seconds pass between key presses, the remote exits programming.

1.Press and hold SETUP until LED flashes twice.

2.Press 9 7 5.

3.Press a device key once (e.g., S1 - S6) to assign a mode for learning.

4.Place the A-SRC1 head-to-head (about 2” apart) from your original remote control. Also locate the key (on original remote control) that will serve as the teaching function.

5.On the A-SRC1, press a key where the learned function will be stored.

6.On the original remote, press and hold the the key to be learned. The A-SRC1 LED will turn off.Continue holding the key on the original remote until the A-SRC1 LED blinks twice.

Note: If the LED displays one long blink, a learning error has occurred. Try repeating this step again until a successful capture occurs. If the function is still not captured, press and hold SETUP to exit pro- gramming. Review the learning precautions listed

Deleting all learned keys in a specific mode

1.Press and hold SETUP until the LED blinks twice.

Note: if more than 15 seconds pass between key presses, the remote exits programming.

2.Press 9 7 6.

3.Press a device key twice (S1 - S6) to delete all the learned keys for that mode. The LED blinks twice.

4.Repeat steps 1-3 for another set of keys for a device, or press and hold SETUP to exit program- ming

TROUBLESHOOTING

Problem: Remote does not control devices or commands are not working properly.

Solution: Try all listed codes for the device. make sure the device operates with an infrared remote control.

ADDITIONAL INFORMATION

The A-SRC1 does not have any user-serviceable parts. Opening the case, except for the battery cover, may cause permanent damage to the A-SRC1.

Russound is not responsible for typographical errors or omissions. A-BUS is a registered trademark of LeisureTech Electronics Pty Ltd Australia

Copyright ©2007 Russound, Inc.

Russound, 5 Forbes Road, Newmarket, NH 03857 603-659-5170 www.russound.com

28-125703/27/07

MANUFACTURER’S CODES

Setup Codes for Audio Amplifiers

Accuphase	30382
Acurus	30765
Adcom	31100, 30577
Aiwa	30406
AudioSource	30011
Bel Canto Design	31583
Bose	30674
Carver	30269
Classe	31461, 31462
Curtis Mathes	30300
Denon	30160
Durabrand	31561
GE	30078
Harman/Kardon	30892
JVC	30331
Kenwood	30356
Korsun	31483
Left Coast	30892
Lenoxx	31561
Linn	30269
Logitech	31408
Luxman	30165
Magnavox	30269
Marantz	30892, 30321, 30269
Mark Levinson	31483
Nakamichi	30321
NEC	30264
Optimus	30395, 30300
Panasonic	30521, 30308
Parasound	30246
Philips	30892, 30269
Pioneer	30013, 30300
Polk Audio	30892, 30269
PS Audio	31523
RCA	30300
Realistic	30395
Sansui	30321
Shure	30264
Sony	30689, 30220, 30815
Soundesign	30078, 30211
Technics	30521, 30308
Victor	30331

Bose	31229, 31253, 30639
Brix	31602
Cambridge Soundworks 31477, 31370
Capetronic	30531
Carver	31189, 30189, 30042, 31089, 30008, 30360
Casio	30195
Clarinette	30195
Classic	31352
Coby	31513, 31389, 31263
Compaq	31136
Criterion	31420
Curtis	31596
Curtis Mathes	30080
Daewoo	31250
Dell	31383
Denon	31360, 30004, 31104, 30771, 31311,
	30273, 31142, 30301
Dynamic Bass	30360
Emerson	30424,	30255
Fisher	31409, 30360, 30219, 31801, 30042
Fonmix	31360
Fosgate	31487
Garrard	30424, 30281, 30463, 30146, 30440
Gateway	31517,	31567
GE	31379
Glory Horse	31263
Go Video	31532
GoldStar	30281
GPX	31299
Hafler	30146
Harman/Kardon	30110, 30189, 30891
Hewlett Packard	31181
Hitachi	31801,	31273
Initial	31426
Inkel	30027, 30062, 30502, 30491
Integra	30135,	31298
JBL	30110, 31306, 30281
JVC	30074, 31282, 31263, 31495, 31374
Kansai	30440
Kenwood	31313, 31570, 31569, 30027, 31051,
	30077, 30313, 31027, 30042, 30239,
	30569, 31052, 30186, 30314
KLH	31412, 31390, 31428
Koss	30424, 30255, 31366
Lasonic	31798, 31510
Lenoxx	31437
Lexicon	31076
Linn	30189
Liquid Video	31497
Lloyd's	30195
LXI	30181
Magnavox	31189, 31269, 30189, 30128, 30391,
	30195, 31089, 31514, 30531
Marantz	31189, 31269, 30039, 30189, 31089,
	31289, 30200, 30128
MCS	30039, 30346
Memorex	31596
Mitsubishi	31393
Modulaire	30195
Musicmagic	31089
NAD	30320
Nakamichi	30347, 30097, 31555
NEC	30235
Norcent	31389
Onkyo	30135, 31298, 30842, 30380, 31531
Optimus	31023, 30801, 31074, 30080, 30186,
	30531, 30797, 30042, 30181, 30440,
	30738, 30849, 30177, 30219, 30670
Oritron	31497, 31366
Panasonic	31518, 30039, 31548, 31764, 30518,
	31350, 31763, 30367, 31316, 31509,
	31633, 30309, 31288, 31363
Penney	30195
Philco	31390
Philips	31189, 31269, 30189, 31365, 31089,
	31266, 31283, 30891, 31368, 30391,
	31120, 31268
Pioneer	31023, 30150, 30630, 31184, 30080,
	30531, 31084, 31384, 30244,31343
Polaroid	31508
Polk Audio	30189, 31289
Proscan	31254

Sonic	30281
Sonic Blue	31383, 31869, 31532
Sony	31058, 31441, 31258, 31759, 30158,
	31442, 31529, 31758, 31371, 31503,
	31042, 31658, 31158, 31858, 31367,
	31406, 31458, 30168, 31558, 31131,
	31349, 31382
Soundesign	30670
Stereophonics	31023
Sunfire	31313, 30314, 30313, 31052
Tae Kwang	30440
Teac	30163, 31267, 31074, 31528, 30463, 31390
Technics	31308, 31518, 30039, 30518, 30309,
	31309, 30208
Techwood	30281
Thorens	31189
Venturer	31390, 30849
Victor	30074
Wards	30158, 30189, 30080, 30054
Yamaha	30176, 30081, 31176, 31375, 30186,
	31331, 31276
Yorx	30195
Zenith	31293, 30857, 30281, 31869

Setup Codes for Cable Converters

ABC	00003, 00008, 00014, 00001, 00007,
	00013, 00011, 00017
Allegro	00315, 00153
Americast	00899
Antronix	00207, 00022
Archer	00797, 00207, 00153, 00022
Belcor	00056
Bell & Howell	00014
Bell South	00899
Cable Star	00056
Cabletenna	00022
Cableview	00022
Century	00153
Citizen	00315, 00153
Clearmaster	00883
ClearMax	00883
Colour Voice	00025, 00031
Comtronics	00040
Contec	00019
Coolmax	00883
Daeryung	01877, 00877, 00477, 00008
Digi	00637
Director	00476
Dumont	00637
Eastern	00002
Emerson	00797
Everquest	00040, 00015
Focus	00400
Funai	00019
Garrard	00153
GC Electronics	00207, 00056
Gehua	00476
Gemini	00797, 00015
General Instrument 00476, 00810, 00276, 00003, 00014,
	00011, 00015
Global	01327
GMI	00015, 00797
GoldStar	00144, 00040
Goodmind	00797
Hamlin	00009, 00273, 00034, 00020, 00259
Hitachi	00014, 00011
Hytex	00007
Jasco	00015, 00315, 00153
Jebsee	00400
Jerrold	00476, 00810, 00276, 00003, 00012,
	00014, 00011, 00015
Leon	00015
LG	00144, 00040
Linsay	00440
Magnavox	00027
Memorex	00000
Motorola	00476, 00810, 00276, 01254, 01106, 01376
Movie Time	00156, 00063
MS	00015
MultiVision	00012
Novaplex	00618

Samsung	00000, 00144, 00040
Scientific Atlanta	01877, 00877, 00477, 00008, 00017
Seam	00510
Signal	00040, 00015
Signature	00011
SL Marx	00040
Sony	01006
Sprucer	00021
Starcom	00003, 00014, 00015
Stargate	00015, 00797, 00040
Starquest	00015
Supercable	00276
Supermax	00883
Sylvania	00001
Tandy	00258
Teleview	00040
Texscan	00001
TFC	00310
Timeless	00040
Tocom	00012, 00013
Torx	00003
Toshiba	00000
Trans PX	00276, 00153, 00315
Tristar	00883
TS	00003
Tusa	00015
TV86	00063
Unika	00207, 00153, 00022
United Artists	00007
Universal	00153, 00056, 00207, 00022, 00191
V2	00883
Viewmaster	00883
Viewstar	00063, 00027, 00258
Vision	00883
Vortex View	00883
Zenith	00000, 00525, 00899
Zentek	00400

Setup Codes for CD Players

ADC	30018
Adcom	30155, 30234
Aiwa	30157, 30124, 30012
Akai	30156
Audio Alchemy	30194
Audio-Technica	30170
BSR	30245, 30194
Burmester	30420
California Audio Labs 30029, 30303
Carrera	30194
Carver	30157, 30437, 30179
Classic	31297
Crown	30122
DAK	30245
DBX	30254
Denon	30873, 30003
DKK	30000
DMX Electronics 30157
Dynamic Bass	30179
Emerson	30305, 30164, 30155, 30469
Fisher	30179, 30174, 31325, 30088, 30342
Garrard	30245, 30420, 30393, 30280, 30425
GE	30009
Gemini	30625
Genexxa	30032, 30305, 30164
GoldStar	30417
GPX	31296
Harman/Kardon	30157, 30173, 31202, 30426
Hitachi	30032, 30155
Inkel	30196, 30180, 30437
Integra	30101
JVC	30072, 31294, 30655
Kenwood	30681, 30826, 30626, 30028, 30037,
	30036, 30190
KLH	31318
Kodak	30287
Korsun	31484
Koss	31317
Krell	30157
Kyocera	30018
LG	31208
Linn	30157

Philips	30626, 30157, 30287
Pioneer	31063, 31062, 30032, 30305, 30468, 31087
Polk Audio	30157
Proton	30157
QED	30157
Quad	30157
Quasar	30029
RadioShack	31075
RCA	31062, 30032, 30305, 30764, 30179,
	30468, 30009, 30155, 30420, 30053
Realistic	30164, 30180, 30155, 30179, 30175, 30420
Rotel	30157, 30420
SAE	30157
Sansui	30157, 30305, 30202
Sanyo	30179, 30087
SAST	30157
Scott	30305, 30164, 30155
Sears	30305
Sharp	30861, 30037, 30180
Sherwood	31067, 30196, 30180, 30426
Shure	30043
Silsonic	30888, 30036
Sonic Frontiers	30157
Sony	30490, 30000, 31364, 30185, 30605,
	30100, 30604
Soundesign	30425, 30145
STS	30018
Symphonic	30305
TAG McLaren	30157
Tascam	30420
TDK	31208
Teac	30393, 30180, 30174, 30420
Technics	30029, 30207, 30303
Tivoli Audio	31553
Vector Research	30194, 30417
Victor	30072
Wards	30157, 30053
Yamaha	30888, 30036, 30187, 30170, 31292
YBA	30625
Yorx	30461
Zonda	30157

Setup Codes for DVD Players

Adcom	21094
Advent	21016
Aiwa	20641, 21912
Akai	20899, 20770, 21975, 21089
Allegro	20869
Amphion Media Works 22016, 22001
AMW	20872, 22016, 22001, 21176
Anam	21913
Apex Digital	20672, 20717, 20797, 21020, 21100,
	20796, 21004, 21061, 21937, 20794,
	20830, 21056, 21915, 20755
Aspire Digital	21168
Audiologic	20736
Audiovox	21071, 21122, 21041, 21121, 21072
Axion	21071, 21072
B & K	20662, 20655
Bel Canto Design 21571
Blaupunkt	20717
Blue Parade	20571
Broksonic	20868, 20695
Cambridge Soundworks 21916
CAVS	21057
Changhong	20627, 21061
CineVision	20876, 20869
Classic	21917
Coby	20778, 21107, 21086, 21923, 20852, 21165
Criterion	22007
Curtis Mathes	21087
CyberHome	21023, 21129, 20816, 21117, 21024
Daewoo	20784, 20869, 20833, 21918, 21172, 20705
Denon	20490, 20634
Dual	21085, 21068
DVD2000	20521
Emerson	20591, 20675, 20821
Enterprise	20591
Fisher	20670, 21919
Funai	20675
Gateway	21077, 21073, 21158
GE	20522, 20815, 20717