AT THE SPEAKER END

1.Cut off excess wire, leaving about 2 feet extending through the speaker cut-out hole.

2.Pull the conductors apart so they’re separated for the first two inches from their ends.

3.Using a wire stripper, diagonal pliers or a knife, remove 1/2 inch of insulation from each conductor.

4.Twist the tiny strands in each conductor into tight spirals, as shown in Figure 4.

5.IMPORTANT: Route the speaker wire THROUGH the sheetrock as shown in Figure 5.

6. Attach the speaker wires to the red

Figure 4

 

and black speaker terminals. Press down

 

on the protruding levers while inserting the

 

wire into the hole.

 

-Correct the POSITIVE (+) conductor to the RED terminal and the NEGATIVE (-) conductor to the BLACK speaker terminal.

-Make sure that no stray strands of wire have gotten detached and are touching the other main wire.

7.Repeat Steps 1 through 6 for the other Russound Ceiling Speaker.

Figure 5

Figure 6

AT THE AMPLIFIER END

1.Cut off excess wire, leaving enough to comfortably reach from the hole in the wall to your stereo system. If there’s a possibility that you’re going to move the amplifier to another part of the room, con- sider leaving some excess wire coiled up. If you’ve used sufficiently thick wire, this extra length will not affect speaker performance and could make re-routing easier if the room is rearranged later.

2.Pull the conductors on both speaker wires apart so they’re separated for the last two inches.

3.Using wire strippers, diagonal pliers or a knife, remove 1/2 inch of insulation from each conductor.

4.Twist the tiny strands in each conductor into tight spirals.

5.Attach the speaker wires to the red and black speaker terminals on the amplifier or receiver.

*Connect the POSITIVE (+) conductor to the RED terminal and the NEGATIVE (-) conductor to the BLACK speaker terminal of the receiv- er/amplifier.

*Make sure that no stray strands of wire have gotten detached and are touching the other main wire.

Repeat Steps 1 through 5 for the other speaker.

6

Page 5 Page 7
Page 6
Image 6
Russound SP523.1, SP522.1, SP503.1 instruction manual AT the Speaker END, AT the Amplifier END, Wire into the hole
Page 5 Page 7

SP503.1, SP522.1, SP523.1 specifications

Russound is renowned for its innovative audio products, and the SP series of speakers—SP523.1, SP503.1, and SP522.1—showcase the brand's commitment to excellence in sound quality and design. Each model in the SP series is engineered to deliver exceptional audio performance, making them ideal for both residential and commercial installations.

The SP523.1 is a standout with its dual 5.25-inch woofers and a 1-inch soft dome tweeter, allowing for a rich and immersive listening experience. Its frequency response ranges from 60 Hz to 20 kHz, ensuring that both low-end bass and high-frequency notes are well represented. Designed for versatility, the SP523.1 can be used in various configurations, including stereo pairs or as part of a multi-room audio system.

The SP503.1, on the other hand, focuses on seamless integration into any room’s décor. With a low-profile design and an elegant finish, these speakers bring aesthetic appeal without compromising sound quality. The SP503.1 features a 5.25-inch woofer and a 1-inch tweeter, ensuring clear and balanced audio reproduction. Its efficiency allows it to perform well even in large spaces, making it an excellent choice for home theaters or entertainment rooms.

Finally, the SP522.1 offers a slightly different approach with its coaxial 6.5-inch driver design, which provides a more comprehensive soundstage by integrating the woofer and tweeter into one unit. This design minimizes phase issues and enhances audio clarity across a wider listening area. The SP522.1 is particularly well-suited for installations where space is a concern but quality cannot be compromised.

All models in the SP series feature robust construction and high-quality materials, ensuring durability and longevity. They also include technologies like high-efficiency drivers and advanced crossover networks, which help deliver a smooth and balanced sound profile across different listening environments.

In summary, the Russound SP523.1, SP503.1, and SP522.1 represent a significant advancement in audio technology, providing users with a variety of options tailored to their unique sound requirements while maintaining the highest standards of quality and performance.
Top Page Image Contents