OPERATION

USE1400677 BATTERY CHARGER ONLY WITH BATTERY PACK NOS. 1400651, 1400652, 1400655, 1400671 AND 1400672

CHARGING BATTERY PACK

See Figures 1 & 2.

Battery pack's are shipped in a low charge condition to prevent possible problems. Therefore, you should charge it prior to use.

NOTE: Batteries will not reach full charge the first time they are charged. Allow several cycles (operating tool followed by recharging batteries) for them to fully charge.

TO CHARGE

Use 1400677 battery charger only with recommended battery packs. See list above.

Make sure power supply is normal house voltage, 120 volts, 60 Hz, AC only.

Connect charger to power supply.

Place battery pack in charger aligning raised rib in charger with groove in battery pack.

Press down on battery pack to be sure contacts on battery pack engage properly with charger contacts.

Red light should turn on. Red light indicates fast charging mode.

If red light is flashing, this indicates battery pack is deeply discharged or hot.

If battery pack is hot, red light should become steady after battery pack has cooled down.

If battery pack is deeply discharged, red light should become steady after voltage has increased, normally within 30 minutes.

If after one hour red light is still flashing, this indicates a defective battery pack and should be replaced.

Green light on indicates battery pack is fully charged or in slow charging mode to maintain battery pack charge. Yellow light on and red light flashing indicates defective battery pack. Return battery pack to your nearest Ryobi Authorized Service Center for checking or replacing.

When your battery pack becomes fully charged, the red light will turn OFF and the green light will turn ON.

After normal usage, 1 hour of charging time is required to be fully charged. A minimum charge time of 1-1/2 hours is required to recharge a completely discharged tool.

The battery pack will become slightly warm to the touch while charging. This is normal and does not indicate a problem.

DO NOT place charger in an area of extreme heat or cold. It will work best at normal room temperature.

When the batteries become fully charged, unplug your charger from power supply and remove the battery pack.

1400677 BATTERY CHARGER

GREEN LIGHT "ON"

CHARGER

INDICATES FULLY CHARGED

 

OR IN SLOW CHARGING MODE

 

 

RED LIGHT "ON"

YELLOW LIGHT "ON" AND RED LIGHT

INDICATES FAST

CHARGING MODE

FLASHING INDICATES DEFECTIVE

 

BATTERY PACK

Fig. 1

BATTERY PACK

 

 

CHARGER

Fig. 2

Page 4

Page 4
Image 4
Ryobi 1400677 specifications Operation, Charging Battery Pack, Battery Charger, To Charge

1400677 specifications

The Ryobi 1400677 is a highly regarded product in the realm of power tools, known for its versatility and reliability. As part of Ryobi's expansive lineup, this device aims to cater to both DIY enthusiasts and professional tradesmen, making it a go-to solution for numerous applications.

One of the standout features of the Ryobi 1400677 is its impressive motor power. With a robust wattage, it ensures high performance across various tasks, whether it be drilling, cutting, or fastening. This powerful motor allows users to work on tougher materials without compromising on efficiency, thereby making it a valuable asset in any toolkit.

The 1400677 also boasts user-friendly technologies that enhance usability. An ergonomic design is central to its appeal, allowing users to operate the tool comfortably over extended periods. The comfortable grip minimizes fatigue, which is particularly beneficial for those working on prolonged projects. Additionally, the tool incorporates advanced vibration reduction technology, further contributing to a smoother operation and improved precision.

Another significant characteristic of the Ryobi 1400677 is its compatibility with the Ryobi One+ system. This innovative feature enables users to interchange batteries with a wide array of other Ryobi tools, promoting convenience and reducing the need for multiple chargers or battery packs. With the One+ system, users can cut down on costs and streamline their workflow.

Durability is also a key aspect of the Ryobi 1400677. Constructed with high-quality materials, it is designed to withstand heavy use and challenging work environments. This durability ensures that it remains a long-lasting option for users, making it a worthy investment.

On the technological side, the Ryobi 1400677 includes integrated LED lighting, enhancing visibility in dimly lit areas. This feature is invaluable for tasks that require precision and attention to detail, ensuring that users can clearly see their work without straining their eyes.

In summary, the Ryobi 1400677 stands out due to its powerful motor, ergonomically designed body, compatibility with the Ryobi One+ system, and integrated LED lighting. These features come together to create a tool that is not only efficient but also user-friendly, making it suitable for a diverse range of applications. Whether you're a seasoned professional or a DIY novice, the Ryobi 1400677 delivers performance and reliability, ensuring that it meets the demands of your projects with ease.