Model 454
Ref. | Part No. | Part Description | |
No. | |||
|
| ||
|
|
| |
1. |
| Shift Rod | |
2. | Upper Handle Ass’y | ||
3. | Lower Handle Ass’y | ||
4. | Hex Screw | ||
5. | Hex Screw | ||
6. | Clevis Pin | ||
7. | Flange Lock Nut | ||
8. | Hex Lock Nut | ||
9. | Cotter Pin | ||
10. | Grip | ||
11. | |||
12. | Foam Grip | ||
14. | Cable Tie | ||
15. | End Plug | ||
16. | Flat Washer 3/8 ID x.620 OD | ||
17. | Bell Washer.340 ID x.872 OD | ||
18. | Shoulder Spacer | ||
19. | Handle Adjustment Crank | ||
20. | Hex Nut Retainer Bracket | ||
21. | Depth Stake | ||
22. | Clutch Bail | ||
23. | Shift Rod Lever | ||
24. | End Cover Ass’y | ||
25. | Hex Cap Screw | ||
26. | Hex Cap Screw | ||
27. | Carriage Bolt | ||
28. | Wing Nut | ||
29. | Lock Washer 3/8 |
30.
31. | Cap Nut | |
32. | Hex Screw | |
33. | Rod |
Ref. | Part No. | Part Description | |
No. | |||
|
|
34.
35. | Side Shield | |
36. | Rear Tine Shield | |
37. | RH Handle Mounting Bracket | |
38. | LH Handle Mounting Bracket | |
39. | Tine Shield | |
40. | Tine Shield Bracket | |
41. | Front Tine Shield Scraper Bracket | |
42. | Shift Crank Ass’y | |
44. | Screw | |
46. | Spiral Pin 3/16 x 1.0 | |
49. | Shift Cover | |
50. | Tine Adapter Ass’y | |
51. | Hex Nut | |
53. | 13” Articulating Tine | |
54. | Shoulder Bolt | |
55. | Flat Washer.51” ID x 1.50” OD | |
56. | Bell Washer.515” ID x 1.14” OD | |
57. | Shoulder Bolt | |
58. | Tine Ass’y Complete | |
59. | Internal Cotter Pin | |
60. | Rubber Washer | |
61. | Cotter Pin | |
62. | Hex Screw | |
63. | Flat Washer | |
64. | Flange Nut.344 ID x.62 OD | |
65. | Lock Washer | |
66. | Hex Nut | |
67. | Truss Screw | |
68. | Hex Lock Nut | |
69. | Battery Hose Clamp 5/16 | |
70. | Flat Washer.260 ID x.720 OD |
17