OPERATION
USING THE DUST COLLECTION BAG
The dust collection bag provides a dust collection system for the sander.
TO ATTACH THE DUST COLLECTION BAG
See Figure 9.
Follow these directions to attach the dust collection bag.
Unplug the sander.
WARNING:
Failure to unplug the tool could result in accidental starting causing possible serious injury.
Slide the dust bag retainer over the blower exhaust hole on the sander.
TO EMPTY THE DUST COLLECTION BAG
For more efficient operation, empty the dust collection bag when it is no more than half full. This action permits the air to flow through the bag better. Always empty and clean the dust collection bag thoroughly upon completion of a sanding operation and before placing the sander in storage.
WARNING:
Collected sanding dust from sanding surface coat- ings such as polyurethanes, linseed oil, etc. can self- ignite in your sander dust collection bag or else- where and cause fire. To reduce the risk of fire always empty your dust bag frequently
Follow these directions to empty the dust collection bag.
Unplug the sander.
WARNING:
Failure to unplug the tool could result in accidental starting causing possible serious injury.
Remove the dust collection bag from the sander.
Unzip the dust bag.
Shake out the dust.
Zip up the dust bag.
Replace the dust collection bag.
NOTE: Periodically, you should turn the dust bag
BLOWER
EXHAUST
HOLE
DUST BAG
RETAINER
Fig. 9
12
