OPERATION
KNOW YOUR ELECTRIC DRILL
See Figure 1.
Before attempting to use your drill, familiarize yourself with all operating features and safety requirements.
WARNING:
If any parts are missing do not operate your drill until the missing parts are replaced. Failure to do so could result in possible serious injury.
KEYLESS CHUCK
APPLICATIONS
(Use only for the purposes listed below)
1.Drilling in wood.
2.Drilling in ceramics, plastics, fiberglass, and laminates.
3.Drilling in both hard and soft metals.
4.Using driving accessories, such as driving screws with screwdriver bits.
5.Mixing paints.
|
| U |
|
|
| N |
|
|
| L |
|
|
| O | |
|
| C | |
|
| K | |
|
|
| L |
|
|
| O |
|
| K | C |
VARIABLE SPEED |
|
| |
CONTROL SELECTOR | |||
| BUTTON | ||
|
| LEVER | |
|
|
| |
VARIABLE SPEED
CONTROL SELECTOR
BUTTON
SWITCH
TRIGGER
SWITCH TRIGGER
Fig. 1
WARNING:
Do not allow familiarity with your drill to make you care- less. Remember that a careless fraction of second is sufficient to inflict severe injury.
ELECTRICAL CONNECTION
Your drill has a precision built Ryobi electric motor. It should be connected to a power supply that is 120 volts, 60 Hz only. Do not operate this tool on direct current (DC). A voltage drop of more than 10 percent will cause a loss of power and the motor will overheat. If this tool does not operate when plugged into an outlet,
Page 5
